Showing posts with label canvas work. Show all posts
Showing posts with label canvas work. Show all posts

Monday, July 15, 2024

2022: Love a bit of Sewing

Canvas Work

In 2022, I did quite a bit of canvas work as I have a small industrial sewing machine on board, a priceless investment that has paid for itself many times over.  

Dodger

The windows in the dodger, bimini and joiner between dodger and bimini needed replacement as they had aged and you could hardly see anything through them.  These would be the dodger’s third set of windows as the originals were made in 2008, replaced in 2011 in Gibraltar after breaking one on our Atlantic crossing, and now 10 years later, no surprise that they needed further replacement.

I removed the dodger and soon realized that replacing windows on such a large item, down below inside the saloon on the chart table, was to be a particularly difficult undertaking.  I viewed some videos, finding Sailrite’s splendid collection of extremely helpful ones, and decided to follow their method of making up various panels and then fixing them together using zips.  

My one piece dodger quickly became six panels – top panel, 2 x side window panels, and 3 x front window panels.  These are all joined using zips with velcro flaps to ensure water tightness.  See photos.  The whole thing was pretty involved (Sailrite make it look easy) but almost all good except for one or two things.  For example, for reasons that completely escape me, when I finally fitted the ‘completed’ dodger back together, some gaps between a couple of edges have developed in two of the front windows and I couldn’t completely do the zip up.  Now fixed.  The dodger is certainly more weather proof than it has ever been and much easier to pull apart and then make small repairs, which are required most seasons.

Finally, I made covers for the stainless steel tubing bows where they rubbed against the windows.  I had not done this previously and my old windows had developed long unsightly burn marks over the years.  I just cut up a towel and put Velcro along the edges then fitted them to the bows.

Life-sling Cover

The original woven cloth cover had succumbed to being out in the weather and so was starting to fall apart, leaving a mess below when we stowed it at the end of each season.  I pulled the old cover apart and measured, then sewed a new sunbrella cover but retained the plastic inserts.  A fairly simple project.

Winch Covers

I serviced the six winches and then made sunbrella covers for each of them.

Stowage Bags

I purchased line stowage bags from Oz and fitted them to hold the lines that run to the cockpit so that the lines are held above the cockpit cushions and there is no accumulation of dirt.  The bags have netting at the bottom so that any water runs out.  Two more are attached to the front of the steering pedestal and used for all sorts of stuff that accumulates in the cockpit eg sun screen, sun glasses, personal safety lines, cockpit light, water bottles, etc.  Buying them was easier than making them in this instance!


Tuesday, February 12, 2019

2017 & 2018: Sail Repairs & Canvas Work

Ongoing Saga: # 6

Mainsail Outhaul Car
.  
I found that this was partially broken and thought I could have it welded back together.  Not so and I had to purchase another one.  Turns out that the replacement part was much better engineered than the original part, so happy to fit a new, more robust fitting as it is very important in handling the mainsail when furling and unfurling.

Mainsail Flattened.  The mainsail had become more full over the years with age, stretching, etc and so I had a sailmaker in Lagos, Portugal flatten it a bit.  It’s better and, more important, it furls better ie it's easier to unfurl.  It used to occasionally stick and take a bit of effort to unfurl.  There has never been a problem with furling funnily enough.

Dodger/Bimini Joiner – Velcro Edges.  The ‘joiner’ covers the gap between the dodger and bimini and is attached when needed utilizing zips, which leak when it’s wet.  I decided to attach flaps over the zips and sewed some edging with Velcro attached so that I had a more water tight join, certainly much better but not perfect by any means.  The joiner is a terrific bit of kit and makes a big different to shelter/comfort in bad/wet weather.  The added Velcro flaps made it even more effective.  Vitally, this ensures my  iPad & navionics continues to function, by keeping the water off the screen (see more comments on the iPad under Comms & Electronics).


Sunday, February 21, 2016

2015: In the Yard & Keeping Busy

Preveza, Greece

Welcome to 2015....... Who'd a thought!

In the Yard
(The plan this year was to do a loop of the Adriatic ending back in Preveza.  Given all the work we'd done on WJ3, we figured on an "easy" prep time in the yard...  Of course you'd never believe that just didn't happen.  Our plans were delayed - big time - and we had to cut short the route.  Still, I'm probably not telling boat owners anything new.) 
All's quiet at Aktio
A view from on high
Engine Raw water inlet Hose.  Last year the hose started to leak and I taped it up (with you-beaut very stretchy silicone tape) so it no longer leaked.  Nevertheless, the hose was clearly failing so this year I replaced it, this time with clear stainless steel reinforced hose.  It runs cold water only as it is between the inlet raw water filter/strainer and the raw water engine pump.  This hose was different to the ‘black’ hose I threw out (which was also looking decidedly worse for wear and likely to leak in one or two other spots) but advice was that this clear hose was quite adequate for the job and, besides, you can observe the water in the hose.  So, as soon as it was fitted, would you believe, there was another water leak – water could be observed/felt dripping from the (new) inlet hose near the water pump.  See up-coming post for the result under Siphon Valve Broken.
Sewing.  The dodger, bimini and the dinghy boat cover needed extensive resewing of most seams plus some repairs to rips in the bimini.  Stitching has been the first to go on these coverings, unlike the acrylic which seems to last forever, and the more I repaired the more I found it needed work. 

It’s quite simple really, just pull on the area around a seam and, if the sewing comes apart easily, then it needs to be resewn.  I reckon I did most of the bimini and dodger.   Same for much of the dinghy cover. 

The (summer) awning also needed repairs and I discovered that ‘shade cloth aint shade cloth, Sol’.  Our shade cloth is easily chafed so I will replace it next year even though it’s only a few years old.  Many boats use shade cloth and they are not well supported on the boom etc and flap around madly, unlike our awning which was made to measure and is well secured to stays etc.  Nevertheless, they don’t seem to damage as readily as ours has done.
Baby donkey had grown quite a bit during our absence
Standing Rig Check.  Our insurers, Pantaenius, asked for a rig check as the rigging was now eight years old.  A local rigging company in Preveza duly obliged and the rig was thoroughly inspected over the space of an hour, no problems found and passed by insurance.  The riggers were a couple of local guys, as helpful as could be with all sorts of advice and just thoroughly nice blokes.  Their shop is located at Cleopatra Marina.
Chandlery.  We'd discovered Cleopatra Marina/Boatyard's well stocked chandlery and obliging staff on arrival in 2014.  And made very good use of it in 2015 too!
Another view over Preveza taken whilst servicing the mast
Can you just imagine Cleopatra & Augustus having a big boating battle in here!

Thursday, January 21, 2016

2014: More Repairs in the Marina

Marmaris, Turkey: Part 2
Work in the Boatyard continues....

Anemometer Smashed.  On checking our electrics etc after returning to the boat I noticed that the anemometer (wind meter) was not showing any reading.  It was on at the screen but not indicating any reading of wind speed or direction.  On checking the masthead through the binoculars I couldn't see it.  I climbed the mast only to find the plug all by itself without the usual staff, with windcups and wind vane completely gone.  I made enquiries of the locals and was informed of a massive hail storm experienced some months beforehand and presumably the wind vane was cleanly knocked off the masthead.  It wasn’t difficult to source a new one and install it.  Just another expense!
Although it doesn't look like it, a storm of 30kts blew over soon after we
arrived at the anchorage off Yat Marin at Marmaris.  Welcome to boating!
And I hope everything is working, including the anchor....

VHF Antenna.  I had previously noticed that our handheld VHF radio had a better range than the mounted VHF radio.  Turned out, after a lot of checking, that the cable plug where it entered the back of the radio had lost its solder from its core.  Our antenna cable has a join at the base of the mast so I only had to remove the cable between radio and mast (thank goodness) and not the cable going up the mast to the masthead antenna.  Had it repaired by a friendly local technician (a lady) in a local shop at the marina, reinstalled it and everything ok again. 
Window Screens.  Our two forward fixed deck windows have mesh screens permanently in place, attached with press studs, which do a superb job, in addition to the tinted windows, in keeping light to a comfortable level inside the main cabin. They were old and needing repair so had them copied by a canvas maker in Marmaris town proper. A superb job & the screens fitted perfectly. 
Marmaris for Work Done on Boats.  Marmaris is probably one of the best places we have had work done in all the places we have been to ie a balance of fair quality work for a very reasonable price, bearing in mind my other observations.  There are plenty of tradespeople to choose from and so there is good competition even at the Yat Marin Marina.  If you didn’t like one or two quotes there were others to approach.  You can actually get firm quotes although in one case one quote was only an approximation which turned out to be much less than the bill ie regassing the fridge in 2013.  The quotes did vary markedly so this is a great place to shop around.  There are also a heap of yacht services in Marmaris town but you either approach them directly or you need to get permission from the marina before they are allowed to work on your boat at the marina, which in our case wasn’t necessary.

Off Datca under a full moon
 

Wednesday, December 4, 2013

Sew not into it....

Curtains & Cushions: 2011

Are curtains worthy of an entry in H460’s serious work related site?  Well ok, if the First Mate (& blog editor) says so!  That's diplomacy at work...

The curtains on WJ3 looked pretty chatty, so in 2009 they were removed and taken home for patterns.  GS then took it upon herself to sew up some new ones – something a bit more nautical.  We found a nice stripe (to match the saloon cushion covers) in Burnt Street last year and bought the roll remainder and some lining too.  (Yes, the Cap’n came too!  He was still suffering from the blowsy rose fabric which GS, left to her own devices, had chosen to cover the settees in WJ2.)
Not the best photo but you get the idea?
The initial plan had been to sew tab-top curtains but as the “curtain rods” are screwed into the interior head liner (ceiling/walls), we subscribe to the theory of leaving sleeping dogs well alone.  Somewhere, and somehow, in the heat and lack of furnishing shops in Deltaville in 2010, GS managed only to get curtains cut out and “bagged”. (His canvas machine isn’t a patch on my Bernina!!) We decided against tabs & button or Velcro fastenings (too much work & way too fiddley) but couldn’t find an alternate method of attaching them to the thin stainless rod. 

That was last year and of course, there wasn’t enough material to quite finish the job anyway…  So here we are working on Plan B.  Whilst shopping for something else in Ikea’s curtain section, GS found some nice stripes to finish off those aft cabin curtains AND some clever hooks (made for Ikea's stainless wire curtain system) just perfect for WJ3’s skinny curtain rods.  We’ve spent the last two years looking for something like this…..

In case you’re wondering why we’ve posted this ordinary event, let me tell you, nothing, and I mean nothing, on a boat is “square” or the same size or Ever goes to plan.  Hummmpffff!

In continuation 2011, Nauti Nells in Deltaville had some nice turks head (brass) keyrings perfect to add that nautical touch to the curtains.  We are still searching for tiebacks, a few more cushions for the settee and of course the perfect Turkish or Moroccan rug…  Let’s not even start on cushions for the forward cabin (sorry, owner’s stateroom!) to jazz it up a bit.  Then there’s some needed for the cockpit (sunbrella - & doesn't Sailrite have some wonderful designs) to aid our lounging about.  The Cap’n is horrified at all this primping needless to say.
GS & Thumper getting to know each other...
It was a short relationship with lots of shouting!

Monday, April 4, 2011

2009: Year 2 - Work in Trinidad

PowerBoats Yard, Chaguaramus: Part 1

PowerBoats Yard - Our Neighbours
We set aside another 2 months of our cruising season to add a few little extras in Trinidad.  Power Boat Yard was a good choice in every respect and we enjoyed getting to know the locals, other cruisers and experiencing life in Trinidad, the capital of “ridim”, mon!  At this stage we had finished our surveyor's report of essential "things to do" and now wanted some repairs or additions to make life a little easier....

Move 'em Out!
Cutter Rig.  I wanted a more easily handled sail arrangement and so we added an inner forestay and new staysail.  WJ3 is now a cutter.  I would heartily recommend our rigging people – Trinidad Rigging – and his local staff who were very easy to work with and totally professional. 

The sailmaker’s new sail appeared to fit okay and looked fine to me.  However, despite my many requests, he never came to check the fitted sail to make sure it was a tailored fitting – very disappointing. 

More Canvas Work.    More canvas work was planned and David, the canvas man at Power Boats (marina/boatyard where we stayed in Trinidad) made side and rear shade cloth curtains for the bimini.  These additions completed the bimini/dodger ensemble so that we can keep both sun and bugs out of the cockpit while allowing the main hatchway to be kept open when it rains.  We have our very own bug house now!  David made another smaller awning for the foredeck and this makes it even cooler when at anchor – great.  Even better, we don’t need to do the “hatches” song & dance routine when it rains, as it frequently does in the tropics.  The bimini also needed stitching in odd places and its PVC window needed to be replaced.  I couldn’t see through it to check the set of my sails.  We also had a cover for Bruce (our dinghy) made to protect him against nasty UV rays.  Now he has his very own “coat”.  David was very patient and professional; working hard to ensure we were completely happy and that his product was delivered on time.  He is highly recommended.
Showing off our Trini renovations in a very friendly Marina Turks Caicos
Insect Screens.   You wouldn’t think these were important until one is set upon by mozzies, can’t-see-ums, etc which can be a daily occurrence in the Caribbean, US Intracoastal Waterway, and Bahamas.  We have screens for most coach house deck hatches.  The Galley Slave is allergic to burning mozzie coils, however we can get away with one lighted in the saloon while keeping screens over our hatches above our bunk in the forward cabin.  This seems to sort out any bugs that make it into our cabin.  With the Hella fans running it is relatively comfortable even in the heat of the tropics. Their biggest issue is having to take them out before we can close the hatches if it rains...so back to the drawing board but, they'll do for now! 

Engine Insulation.  I replaced engine and generator insulation as the old insulation was coming away and the old foam was becoming powdery – an easy job to do myself.  I simply cut out the required shape and applied contact cement and/or pins/buttons, which all made for a secure attachment.

Generator Upgrade & Repairs.  We had a coolant reservoir fitted to the generator (same as more modern versions) by a professional mechanic and it’s now much easier to control coolant levels, especially when at sea. 

I also replaced my raw water impellor when I noticed there was only a relatively small flow of water being expelled through the exhaust.  Removed impellor plus bits of impellor blades and replaced with spare. I now do this routinely for both the engine and generator at the start of each season – I keep the old impellors that are undamaged, as spares. 

Sunday, April 3, 2011

2008: Bequia & Elvis Found


Doing the Housework in Bequia with Daffodil
Tobago Cays - anchorage a little rough today
Work Completed Underway: Part 4

Having made it this far south by late August, we felt the need to relax a little and enjoy the marvellous, clear waters of Bequia, SVG.  We anchored off Tony Gibbons Beach, resupplied missing fishing lures at Wallace & Co. (further round the bay) and Lulley’s (right in town), then decided to have our dodger & awning made up whilst we cruised SVG. 

Canvas Work.  We wanted a dodger sewn up (having had the stainless bows constructed in St Martin) and, with an extra attachment between the dodger and bimini, the whole cockpit would be effectively protected from sun, spray and rain.  We also had a huge awning made for over the boom – we certainly have made good use of it since, even on the hard at Deltaville!  I would certainly recommend Withfield Laidlow as a friendly and professional canvas man – he’s also the agent for North Sails, sailmakers in Bequia.  He also suggested, given the low profile of our dodger, we should add an extra bow (a third) to our frame to provide more support.


6 years on & this dodger is still doing great service
While our order was being made, we took a week to tour the nearby islands of Tobago Cays and Mayreau.  Well, someone's gotta do it!

If you're wondering about Elvis, yes it's true!  We found him crooning in a delightful little restaurant in Bequia.  Of course, it doesn't pay as well as Gracelands Inc but why not ditch the rat race for an island paradise...
Shopping in Tobago Cays