Showing posts with label 2009. Show all posts
Showing posts with label 2009. Show all posts

Friday, June 10, 2011

Keeping Home Fires Burning

Back Home in OZ: 2009

Repairing Electronics in Australia.
  I sent the Raymarine stuff to the agent in Sydney and they repaired the wind instrument (AUD 140) but they could not repair the fixed GPS (new one USD 300) so I had to replace it completely, although the original wiring was okay to be used.  The Simrad repair agent in New Zealand tested and carried out a small repair to the autopilot which cost nothing – nice guys.  In all, the experience was a good one – no fuss, no hassle and what could be retrieved was.  It provided me with a good starting point for the messy business of fixing the lightning damages.



Cooked as a goog
EPIRB.  A personal locator beacon (PLB) came with the purchase of the boat and, after some mucking around, we managed to convince the US authorities to register it in the US, even with our home address and contact details in Australia.  The Australian Authorities didn’t want to know us as the PLB has a code that is country specific ie a US number.  I understand that one can have the number changed somehow.  We have also purchased an EPIRB in Australia so that is registered in Australia but with the same contact details that we have for the PLB.  We felt we were on a hamster wheel for a while - going fast but getting nowhere!

Purchasing Stuff via the Internet.  We have ordered lots of stuff over the internet, in the US especially.  This makes it very easy to find and purchase what you want.  Delivery can be as quick as you care to pay for it but $extra can get you lots of things within one week from anywhere in the US eg electronics delivered right to your marina door.   It is time consuming though and part of that is because, as a foreigner, you need to be able to use your (in our case) home based credit card.  Many companies won’t allow this; you have to have a US billing address.  So, I always call the company (using Skype) to confirm that they can take foreign cards while allowing for the goods to be delivered to the (US) boatyard.  I also check that they have the item in stock as, very often they won’t tell you (on their website) that the item is in fact not in their stock at that time.  We learnt this lesson waiting about three weeks for a delivery (rather than the usual one).  This can have the potential to affect your departure plans and weather windows wait for no man – don’t we know it!

Sunday, June 5, 2011

Journey's End 2009


Crab Crackin' at Deltaville Marina
Jackson Creek, Deltaville: 2009

Deltaville.  We planned to leave WJ3 for the winter in Deltaville, and as it can get cold this far north, we spent about two weeks before departure cleaning and winterising her.  As winterising was a new concept for us (lucky Aussies aren’t we) we had the engine properly serviced whilst I observed and took lots of notes, and then did the rest ourselves.  The staff at the Deltaville Boatyard were more than helpful.  I connected a small solar panel to the batteries while the boat was laid up. All this prep work took us a good 10 days, most of the time living on the boat on the hard.  Although this had its down side, we did get to meet a few fellow travellers in the Marina Lounge. Having covered a distance from Trinidad to Deltaville, some 2789nm, we flew home end of September 2009 more than pleased with our efforts.
Thar She Blow's!  Hauling out is always an unnerving experience...

Saturday, June 4, 2011

Jacksonville: Down on City Dock

City Dock, on St Johns River: 2009

To avoid damage from any further lightning strikes we usefully employed
jumper leads (connected to the stays and dropped in the water) at any
sign of bad weather.  An Old Sailor's Trick or Old Wives' Tale...

While we were docked in Jacksonville at the free town dock, we sought advice about repairing lightning damaged electronics.  This was an expensive lesson for no new information, and in the end, I removed the black boxes and took them home to Australia where I knew that I had time for repairs to be undertaken (and not be in a rush to escape hurricane season in Florida).  I could also be more certain of advice and that items could be repaired in appropriate manufacturers’ service centres.

In the USA the fuel injector pump started to leak around the edges/gasket, so I removed it myself and had it professionally repaired/serviced at a diesel engine shop in Jacksonville.  I had to refit it myself due to time restraints – no leaks since.   The shop was some distance out of Jacksonville CBD, so the bike got a good work-out that day – so did I in the heat!  When putting the pump back in the generator I had an awful experience when a locking pin fell inside the generator.  I eventually recovered it after about an hour or more ‘fishing’ around.  Needed a beer or two that night to replace lost body fluids!  It sure was hot in Jacksonville.
Loads of traffic on the river to Jacksonville

Sunday, May 29, 2011

Daytona Dreamin'

There's a beach in there. Well, somewhere!
Halifax Harbour Marina, Daytona: 2009

We limped on to Daytona, staying at Halifax Harbor Marina for a week licking our wounds and hoping that repairs could be made - quickly.  Although Jacksonville was later suggested as a better option for Simrad & other electronic gear repairs, we took the opportunity to have the regulator and inverter/charger replaced by Mike, a friendly and helpful local.  Our old one had ceased to work properly ie batteries were not being recharged efficiently when the main engine was running. I cannot say whether this was caused by the lightning strike but it seems, in hindsight, rather coincidental, although they didn’t fail immediately as a result of the strike.

Calm after the Storm
We took the chance to lookover Daytona's famous beaches and fast cars.  We even found a few bargain boat bits shops - a chance to stock up on well, more stock, for the store room.  GS tells me WJ3 is seriously listing to the left.
Hot Wheels in Daytona

Saturday, May 21, 2011

Titusville: Land of Lightning Strikes

Titusville, Florida: 2009

Aptly named, we thought afterwards!  WJ3 was struck by lightning while on anchor near the Titusville Marina in July 2009.  In a stunning display of sparks, lightning blew the VHF antenna off the masthead, destroying the windex too and cooking the (old) VHF radio.  Most sensitive electronics no longer functioned properly (they appeared to be okay; lights came on but nobody home!) including some auxiliary autopilot harness components (not the computer, nor the front panel, or the rudder indicator, or the gyro compass – they all checked out okay subsequently).  The fixed GPS lighted up but wouldn’t send information; the handheld GPS showed a position on its dial but would no longer interface with computer.  The water and fuel tank monitoring system also stopped working – I expect it is probably the front panel that failed and I plan to start with that first – an upcoming repair for 2011.


However, the boat’s major metal fittings are grounded and this appears to have saved us from major damage.  I had recently replaced (the day before the strike would you believe) a corroded copper strap joining the base of the mast to a keel bolt (whew).  US-manufactured boats apparently have to be grounded (unlike European-manufactured boats, I’m told) so avoided major structural damages because of this.  Wouldn’t like to repeat the experience however as most technicians simply recommend to replace everything, which of course is very expensive.  It did take quite some time to identify what components worked and what didn’t any more however, so it would probably be a waste of time (and money) to pay for a technician to try and work out where exactly the problem(s) lay rather than just replace stuff, which an owner can fairly easily do.  I plan to replace the sensitive electronic components asap.

You've just got to be there to appreciate these storm fronts
We, thankfully were not hurt despite my standing in the cockpit to watch the storm, as it suddenly changed direction and came directly toward us.  We heard a loud bang and then the First Mate, standing more cautiously on the companionway stairs saw sparks shower behind me into the water.  She said the fishing rods on the stern appeared to light up like Christmas trees. We were the only ones in the anchorage/marina who suffered from a strike that evening.  Our lucky day – yes and no!

Wednesday, May 18, 2011

An Eventful ICW

A clear wake across the Gulf Stream
Lake Worth Anchorage: 2009

Welcome to the US of A!!  An ever watchful Coast Guard made their presence felt not long after we left West End, Bahamas making our way to West Palm Beach.  We nervously anticipated crossing the Gulf Stream but it behaved beautifully and our crossing was without incident.  Except we were intercepted!  Our papers in order & questions answered correctly, we were able to continue on to our destination.   Not before noticing the level of surveillance.  Powerful boats, regular air patrols and even a little grey rib (with Men in Black) as we neared the coast.  

Once anchored in Lake Worth, we were easily able to walk to the Coast Guard Office.  We left Bruce, our faithful dinghy under the watchful eye of staff at the Riviera Beach Municiple Marina.  So, with cruising permit in hand (from the Spanish Virgins) we complete the paperwork to check in.  No fuss, no bother. The experience was nothing at all like rumour mill "advice" we had been given.  Even so, we were glad to have everything in order and to have phoned on arrival (once anchored) for their advice. 
 
Will we or won't we??
Bridges.  Our mast didn’t hit any of the many bridges we encountered while cruising northwards along the Intracoastal Waterway.  Helpfully, at most of the bridges, there was a marker indicating the distance from waterline to the bottom of the bridge.  Our mast is 63’ above the waterline, plus the VHF antenna height – about another three feet – and the bridges were said to be a minimum of 65’ above the water.  I think that turned out to be quite true.  Our antenna never hit but we always (except one time) approached each bridge at minimum speed.  Why?  As you look from the deck, it always seems that the mast is going to hit the bridge or power lines – no matter how high they are.   We became more confident as we progressed though.  With some glee, we watched son, who had joined us for a few weeks, almost fill his pants when we forged full speed under the first bridge that we came to.  I think we entertained quite a few fellow boaters and onlookers as we negotiated those bridges from West Palm Beach to Norfolk for the same reason.

Just give me a helmet &
a black leather jacket and I'm set
Shallow Draft Keel.  Our keel is shallow draft (5’6’’), wing and bulb affair.  Our method of getting off when grounded is simply to try and reverse or accept a tow from some kind people in passing hot water boats.  We found from experience (plus obvious common sense once we tried it), that pulling over our mast or putting the boom over the side, etc only dug the winged keel in deeper in the soft mud. Not helpful at all!  One time we simply put out the anchor then waited with a coffee while the tide came in.  Twenty minutes later we were away again……

Folding Bicycles.  We purchased two folding bikes from West Marine in Vero Beach – they’ve already paid for themselves.   You can see so much more, visit more interesting places than you would just walking around.  Those American supermarkets that are almost always one or two plus miles away from your anchorage are easily accessible by bike.  We’ve loaded milk crates on the back to carry our groceries home and the First Mate has a (girlie) basket on her handlebars.  We also use our backpacks.  If we were ever stopped at a bicycle weighbridge coming back from a supermarket we’d be way over the limit!
Channel Markers come in handy too!
Autohelm Speed/Log.  Originally I had replaced the dial in BVI because it was old and difficult to read.  Later I replaced it with another one in the US (from a great boat spares shop in St Augustine).  This was one of the many easy fixes "on-the-go" as we rolled up the ICW.  We were spoilt for choice in terms of ships chandlers like West Marine and came across some great second hand stores too.  

Tuesday, May 3, 2011

A Lesson in St Croix

Before we leave the Caribbean, I want to share a valuable lesson or two….
  
Dinghy - Outboard Engine Cut-off.  I jumped into the dinghy from WJ3 with a disconnected painter in my hand without first checking that the engine cut-off clip was in place.  It wasn’t (still back on board) and so we had to paddle back to the boat. It took 20 minutes of hard work to make up 10 metres in a strong-ish current and wind.  We both learnt a lot about dinghy keys and not to cast off prematurely before the dinghy engine starts, especially in a strong current and/or wind and even worse, in isolated areas.
Remote but Beautiful - Buck Island off St Croix
Sailing in Tropical Waters. Reading the channel markers around the treacherous middle reef in Christiansted Harbor can be quite challenging even in the middle of the day on a good tide.  Sadly, it claimed another victim whilst we anchored nearby. You can never be too careful.
Stuck fast in the early morning

Saturday, April 23, 2011

2009: Trinidad to the Chesapeake

We said goodbye to friends in Trinidad



























Work Completed Underway: 2009

We managed to escape Trinidad ….eventually!  The budget was somewhat depleted but we now had an autopilot - a tolerant and hardworking addition to our crew.  Our lives became a lot easier - although the self-steering, Burt was a bit miffed at being packed away!  More repairs underway took centre stage – always at the wrong time. 

Galley Bench.  The galley centreline bench was not attached at all to the stringer at its base on the floor, as it should have been and as shown in the Owner’s Manual.  I had to carry out repairs after the bench started shifting while we were sailing along in a seaway between Dominica and Guadeloupe; it was no fun for either skipper or crew!  Sadly, an example of lack of supervision in the manufacturing process.

Found an aquarium all to ourselves
in the Bahamas
Hose Clips.  I have also replaced quite a lot of old hose clips on fuel lines as we travel on. Loose clips allow air to be sucked in which occasionally cuts out the engine – and that never happens at convenient places or times.  We even found clips in out of the way places like Black Point (Exumas) so I now have a box full of various sizes and regularly check hose clips whenever accessing the boat’s plumbing.  Even though they are stainless steel an extraordinary number of them corrode and you only have to try and tighten them with a screwdriver/wrench and it soon becomes apparent when they no longer hold i.e. they easily rotate without tightening.  I throw these old ones away.

Engine Fan Belt.  The fan belt broke just as we were coming into a tricky anchorage at Normans Cay, the Bahamas!  The engine’s horn sounded and its dial showed a rather high temperature, but when I throttled down, I was able to lower the water temperature (I knew because the horn stopped blaring) and made for the anchorage at almost idle speed.  Not good when dodging coral bommies in an unfamiliar harbour.  After anchoring, I replaced the fan belt with a spare (fortunately) carried on board.  A very forgiving engine!!
Do you think they sell fan belts & hose clips too?

Sunday, April 17, 2011

2009: More Work in Trinidad

PowerBoats Yard, Chagauramus: Part 2

Plumbing.   In 2009, I had to replace the automatic bilge pump switch.  As you do.....

It pays to be handy
Stove.  In Trinidad the stove was not working properly and I decided on a professional overhaul.  

We engaged a local repairman.  I had to remove the stove from boat myself, so I should have recognised a downhill slide in the making!  When the stove was returned it was worse than when it had been taken away.  Eventually I serviced it myself so that knobs worked properly (removed all the grease the repairman had put into knob mechanisms), fixed into place the sensors that needed to be located up against the burners, and did a bit of cleaning.  

This chap was recommended in a cruising guide, and in hindsight, we’ve concluded that what works for one may not work for others.  Anyway, it all worked swimmingly afterwards.  I still need to repair the auto lighting mechanism – the GS has to manually light burners. (She says that’s not too onerous however!)

Davits. We added custom davits in Trinidad to make dinghy handling a lot easier.  When sailing offshore in the Caribbean we’d put our outboard motor on a bracket on the stern (utilizing boom topping lift and block and tackle to raise dinghy) then raise the 11’ RIB on the davits via block and tackle to lines attached to front and back of RIB.  Initially this needed two people to raise outboard and one to raise dinghy but I can do it all singlehandedly now.  I tie the dinghy down to stop the RIB bouncing around when under sail/motor ie breast lines and springs.  When at anchor and using our dinghy, we can raise both dinghy with outboard still attached for security reasons if we have to.  Otherwise we use stainless anchor chain with padlocks to lock it all to WJ3.  For more serious blue water journeys, we still put the dinghy on foredeck (upside down) using the spinnaker halyard.  There’s enough room to lay it down in front of mast.  The outboard lives on its bracket on the pushpit.  I can’t use the windvane self steering when the davits are in place so especially asked for the davits to be removable/or rotated out of the way when the dinghy is put on the foredeck.  We sourced the fabricator through Power Boats and he did an excellent job, even coming out to the boat after we had launched to re-weld a join that we were concerned about.

We simply can't fit another thing on the stern
Autopilot.  I had a Simrad installed in 2009. It works a treat; just marvellous until it stops, which a lightning strike will do (and has).  We used this constantly from Trinidad up to the Bahamas and across to the Atlantic ICW.  It gave us a second pair of hands and kept its course better than either of us could.  The guys at Electropics were very professional and had it installed and working so that we could make our departure date.

Steering.  I had a defective wheel lock repaired and replaced (it had been removed), again with the professional help of Trinidad Rigging.  This required the steering pedestal to be completely pulled apart.  One bearing was damaged so I replaced it and also added two circlips (that hold the bottom bearing in place – one on top of the bearing, one on the bottom) that were not actually there.  They should have been. So much for maintenance by bareboat charter companies!

Batteries.  We had to replace them again in 2009, this time with four golf-cart batteries rather than the two D9s.  A new battery selector switch was also fitted at the same time, the battery wiring tidied up to better conform with industry wiring standards and new battery fuses fitted on wall of battery housing.  Our mech-elec’s team (on site at Powers) were very thorough and professional. 

RIB Repairs.  Bruce’s (our RIB) fibreglass hull leaked via several cracks in the hull gelcoat.  We had that professionally repaired allowing me to get on with other stuff as our departure date loomed.  At the same time, I removed all the headliner internal access plates and had them painted with Awlgrip to match our interior lining colour.  Now replaced, it looks 10 times better than the original plastic which must be a different plastic to the headliner.

Monday, April 4, 2011

2009: Year 2 - Work in Trinidad

PowerBoats Yard, Chaguaramus: Part 1

PowerBoats Yard - Our Neighbours
We set aside another 2 months of our cruising season to add a few little extras in Trinidad.  Power Boat Yard was a good choice in every respect and we enjoyed getting to know the locals, other cruisers and experiencing life in Trinidad, the capital of “ridim”, mon!  At this stage we had finished our surveyor's report of essential "things to do" and now wanted some repairs or additions to make life a little easier....

Move 'em Out!
Cutter Rig.  I wanted a more easily handled sail arrangement and so we added an inner forestay and new staysail.  WJ3 is now a cutter.  I would heartily recommend our rigging people – Trinidad Rigging – and his local staff who were very easy to work with and totally professional. 

The sailmaker’s new sail appeared to fit okay and looked fine to me.  However, despite my many requests, he never came to check the fitted sail to make sure it was a tailored fitting – very disappointing. 

More Canvas Work.    More canvas work was planned and David, the canvas man at Power Boats (marina/boatyard where we stayed in Trinidad) made side and rear shade cloth curtains for the bimini.  These additions completed the bimini/dodger ensemble so that we can keep both sun and bugs out of the cockpit while allowing the main hatchway to be kept open when it rains.  We have our very own bug house now!  David made another smaller awning for the foredeck and this makes it even cooler when at anchor – great.  Even better, we don’t need to do the “hatches” song & dance routine when it rains, as it frequently does in the tropics.  The bimini also needed stitching in odd places and its PVC window needed to be replaced.  I couldn’t see through it to check the set of my sails.  We also had a cover for Bruce (our dinghy) made to protect him against nasty UV rays.  Now he has his very own “coat”.  David was very patient and professional; working hard to ensure we were completely happy and that his product was delivered on time.  He is highly recommended.
Showing off our Trini renovations in a very friendly Marina Turks Caicos
Insect Screens.   You wouldn’t think these were important until one is set upon by mozzies, can’t-see-ums, etc which can be a daily occurrence in the Caribbean, US Intracoastal Waterway, and Bahamas.  We have screens for most coach house deck hatches.  The Galley Slave is allergic to burning mozzie coils, however we can get away with one lighted in the saloon while keeping screens over our hatches above our bunk in the forward cabin.  This seems to sort out any bugs that make it into our cabin.  With the Hella fans running it is relatively comfortable even in the heat of the tropics. Their biggest issue is having to take them out before we can close the hatches if it rains...so back to the drawing board but, they'll do for now! 

Engine Insulation.  I replaced engine and generator insulation as the old insulation was coming away and the old foam was becoming powdery – an easy job to do myself.  I simply cut out the required shape and applied contact cement and/or pins/buttons, which all made for a secure attachment.

Generator Upgrade & Repairs.  We had a coolant reservoir fitted to the generator (same as more modern versions) by a professional mechanic and it’s now much easier to control coolant levels, especially when at sea. 

I also replaced my raw water impellor when I noticed there was only a relatively small flow of water being expelled through the exhaust.  Removed impellor plus bits of impellor blades and replaced with spare. I now do this routinely for both the engine and generator at the start of each season – I keep the old impellors that are undamaged, as spares. 

Thursday, March 24, 2011

Getting Work Done Overseas (And Home Perhaps)

Getting to dream locations like this in St Croix
It isn’t easy and in fact it can be downright difficult to almost impossible at times to get work done, especially in a foreign country.  I’m sure, like me, you have read stories of boat owners giving up on getting work done in a particular locations.  Alternatively, the work has been shoddy, promises made but not kept, etc.  Herewith some lessons I learnt, sometimes the hard way.  This sort of project is not for the feint hearted and if you intend to do something similar then I recommend following the three ‘P’s’ as someone kindly passed on to me in BVI - Use Patience, Politeness, and Perseverance - Always.

Obtaining Quotes.  By all means try to follow this most basic of rules.  In BVI it was impossible because (when I was there in May/Jun08)  there were large charter fleets which get priority for work, for obvious reasons, as do local boat owners and, of course, super yachts.  There was a great demand for available tradesmen.  I found just getting work done was a major achievement so I forgot all about trying to get quotes.  Of course, I became more adept at judging who to use and who not to (more on this later).   In Trinidad you could get quotes for work to be done and make the appropriate selection – note that there aren’t any charter fleets there to compete against and the industry is geared towards the cruising sailor.  Even in the USA it has been difficult to get a straight quote.

Cheap Labour.  It might exist but I never found it unless you took on a local worker, after hours.  Some of them are quite good, some are less than good.  How do you know the difference – ask around and get firm opinions from fellow cruisers who you know personally that have had satisfactory work done for them.  Get several opinions if you can, it might save you a lot of time, money and heartache later on – a good investment early on.  I often found the more expensive tradesman was cheaper in the long run – a $70 per hour guy who takes one hour to do what you want rather than two hours by the $50 per hour guy.  I also found some tradies were happy to explain to you what they were doing and so you were receiving ‘free’ tuition at the same time – this was invaluable.  You are often charged high rates for time worked but much of the work might be undertaken by semi-skilled labour contracted out.  Labour is not cheap in the Caribbean, anywhere that I went.  The hourly rate for labour in the BVI was around $50-70 (with some notable exceptions) and it was very similar in Trinidad. 
Can lead to unfortunate incidents like this
(That's not us stuck on a coral reef in St Croix!)
Supervision.  I prefer to be present when work is undertaken as workers are often unsupervised.  There are prolific stories of workers simply not doing anything when found by the owners yet, at the same time, owners are being charged for their time.  I had the rudder replaced by a local contractor in BVI and the guy didn’t appear to fully know what he was doing; his philosophy seemed “hit the quadrant hard enough with a hammer and it should fix the problem”.  The casting was broken, had to be welded (twice) and I eventually complained to his boss to come and supervise the work.  I also had to suggest that they place shims around the top of the rudder shaft as the new stainless shaft was slightly smaller than the previous shaft that held the rudder quadrant.  I shouldn’t have had to do that.

Keep Your Yard Informed.  Boatyards generally want their customers to go away happy and prepared to recommend them to other boat owners.  Many marinas have their ‘favourites’ (contractors) that they recommend to you for work to be carried out – they will be those based at the yard or have satisfied some other criteria that allows them to be contracted while still being based elsewhere.   Yards don’t want to employ/recommend contractors that are not giving good service.  This was very entrenched at Power Boats in Trinidad and part of the culture.  It was also very helpful when I was at Nanny Cay Marina in BVI – on one occasion when I was not happy I raised a concern with the yard manager there and he was very supportive and helpful ie he ‘discussed’ the work being done by the contractor to sort out my problems.  Nanny Cay had just employed a full time manager when I was there to look after their customers’ interests. They have a similar system in place at Power Boats.  I wished I had known how important this was when I first started work on my boat.

Check the Paperwork.  Workers will often exaggerate their time on the job and you will pay for it, because they’ve skived off to have a smoke, have a chat with their mates, etc.  On other occasions, they will be scrupulously honest and get you to sign their time sheets.  Check the arrangements first with your contractor.

Getting Work Done When You Are Not There.  I have found it extremely difficult to get work done successfully in our absence.  Generally, things happen when you are there and probably need to be since one often has to make decisions on the spot which aren’t apparent initially eg when there are several options to be considered – difficult to do via email really.  If you are planning to have work done, include time to stay up on the hard or on the dock (at least a week or two) before launching so that you can be there to supervise any work.

Good Contractors.  In BVI my top contractor/technician was a Canadian, also an active sailor at the Bitter End Yacht Club.  Even though his boss charged top dollar, he provided top quality work, talked to me about what he was doing, did more than I asked for and willingly passed on to me other information to help me learn about my engine, plus plus.  My BVI Yacht Sales broker and his fellow staff members were also very good and extremely helpful whenever I bothered them for advice, which was often and wide ranging.  In Trinidad, the expert riggers (local and expat) from Trinidad Rigging were very helpful and professional.  The canvas man, from The Upholstery Shop in Power Boat’s compound in Trinidad, was very cooperative and did excellent work.  In Guadeloupe, when I had to get the generator fuses fixed, an electrician (Waypoint) even went as far as to lend me his personal car so that my son and I could purchase a few bits and pieces on the other side of town. This was exciting for us – driving around a large city on the ‘wrong’ side of the road.  He also explained things as he worked on the generator.  The two marinas - Power Boats in Trinidad and Nanny Cay Marina in BVI - have been great and very helpful.  You just have to find the good people and avoid the not-so-good, a challenge but don’t be afraid to trust your instincts.

Deliveries & Orders.  I would have to advise against picking up bits & pieces along the way as you cruise unless you really have to – let me explain.  Initially, our main constraint was weather (it was the start of the hurricane season and we needed to keep moving on to Trinidad) and our order for a windvane self steering device came (from the UK) in 2 boxes, separately.  We picked up one box and fitted the contents in St Martin – duty free and waited for the next delivery, the all important auxiliary rudder.  We had to move on before the second box arrived so stopped in Antigua then in Guadeloupe; finally the rudder arrived and we could be on our way.  Not before paying duty and being hijacked by a local taxi driver – a most unpleasant experience, which fortunately, the marina staff helped me sort out.  In another instance in BVI we ordered some spare parts.  As they hadn’t arrived before the date we were due to leave, a fixed date we had originally passed onto the contractor, we let the business know we were leaving.  Some four months later, he was still demanding payment for an item we never received, even going so far as to importune the yacht broker staff for the money.  So, keep records of everything – what & when you order, especially who you speak to and what was said!  And remember those 3 P’s…..
And you find yourself in places like this trying to find someone to fix them.
(Jacksonville, Florida)