Showing posts with label design details. Show all posts
Showing posts with label design details. Show all posts

Saturday, August 3, 2013

Bah Humbug!

Pylos, Greece: 2013

(This post has been previously published on our WJ3 site.  As it's been a while since the Cap'n did some serious homework on his "tricking up" of the other woman, this will have to suffice - for a little while longer.  The First Mate is nagging, seriously...)

Sitting on anchor in Pylos, our first Greek port of call after a whirlwind tour through the Med, I’m tempted to hurl a sharp missive to three soothsayers, visitors to the Deltaville Boatyard (Virginia, USA) in, 2010.

Let me set the scene.  There we were at the far end of the boat yard, up on spindly legs getting ready to splash.  Afternoon visitors to the yard were not uncommon and three stopped by for a chat.  Actually, they stopped to highlight Hunter’s foibles, especially as they saw it; "only built to suit coastal conditions," they said.  Like Witches of Endor, they stirred the pot, making even more outrageous dispersions against Hunter, ignoring our rebuttal. 

Finally, they left.  “Rude,” we said in unison.  Had they bothered to listen, WJ3 had already done two laps of the Caribbean Islands, sailed to distant Turks Caicos and managed a tour through remoter Bahamas Islands.  All this before settling on the scenic route to Chesapeake Bay (via the Atlantic ICW). We were on our way to explore Maine.  Hardly dock candy, even then!

So, as we sit on anchor in Greece, about to island hop to Turkey in 2013, we say to them, bah humbug!  WJ3 has 12598 nautical miles tucked under her belt since we started sailing her in 2008.  She has now crossed the Atlantic, comfortably and safely, and this year crossed the Mediterranean.  What a gal!  And not bad for an allegedly “unseaworthy” Hunter!

Now I’m not advocating setting out to sea in a pair of floating shoes (it’s been done before) but boat builders must comply with certain standards.  We’ve also added modifications to make WJ3 more comfortable (eg. a storm trysail) and to improve her safety (eg a sea anchor).  If in doubt, have your craft surveyed and read how others have set up for ocean passages.  We’ve seen expensive Beneteaus kept in marinas for Olympic triangle racing and home-made brutes only a mother could love, floating in far-flung, out of the way places.  

Doubting Thomas’s can check our map tracker here.)
Sharing Keci Buku in Turkey with some real bunnies...

Sunday, June 19, 2011

No Dock Candy Here

Sailing Magazine’s John Kretschmer reviewed Hunter 460’s in his article for “Used Boat Notebook” Nov/Dec 2010 issue (p34).  The 460 is described as a capable and affordable cruiser that is holding its resale value despite the market downturn (due to the GFC).  We noted his comment about the carbon fibre rudder stock and were in full agreement – we replaced ours with stainless in early BVI days.
On Anchor in Baltimore's Canton (JGP Photo)
I certainly agree that the Hunter Owner’s web site is an excellent and friendly resource.  I used it quite a lot in our early days (pre-owner) to find out if the 460 was the one for us.  We like to gunkhole in quiet anchorages rather than pull up to marinas, and were concerned the 460 was more a floating show pony.  Our experiences have proved otherwise as we’ve since cruised the Caribbean to Trinidad (2008),  up to Chesapeake via the Bahamas and the ICW in 2009 and Maine, New England coasts in 2010.  Hunter themselves have been very helpful too, as since purchase, I’ve negotiated my way around numerous repairs and upgrades.  I was sorry to have missed an opportunity to visit their factory on my way up the ICW though.

The features we really like, informed by 3 years of ownership, are the swim-step and its shower, and the hatches that open wide to let in balmy tropical breezes.  The accommodations are really easy to live in and though seem somewhat voluminous at sea, we rarely move forward of the saloon when underway.  The galley is very secure for the Slave at sea, the nav station easy to slide into and the amidships head well positioned for any action, even in rough conditions.  WJ3 has been rigged for shorthanded sailing too (as Soul Mate) with all lines coming back into the cockpit. Of course there are a few limitations to the Hunter 460 but I think I’ve covered them in previous posts.  

So, it was good to read positive things about the 460 and for us to compare the analysis with our own experiences.  Well done Sailing Magazine because we agree.  We’ve found our Hunter 460 to be an easy live-aboard, safe and comfortable cruiser.  On the bluewater or slumming up the ICW, WJ3’s the gal for us!

(For another & older review (2000) we found this one on line from Sea Magazine.)

Saturday, May 21, 2011

Titusville: Land of Lightning Strikes

Titusville, Florida: 2009

Aptly named, we thought afterwards!  WJ3 was struck by lightning while on anchor near the Titusville Marina in July 2009.  In a stunning display of sparks, lightning blew the VHF antenna off the masthead, destroying the windex too and cooking the (old) VHF radio.  Most sensitive electronics no longer functioned properly (they appeared to be okay; lights came on but nobody home!) including some auxiliary autopilot harness components (not the computer, nor the front panel, or the rudder indicator, or the gyro compass – they all checked out okay subsequently).  The fixed GPS lighted up but wouldn’t send information; the handheld GPS showed a position on its dial but would no longer interface with computer.  The water and fuel tank monitoring system also stopped working – I expect it is probably the front panel that failed and I plan to start with that first – an upcoming repair for 2011.


However, the boat’s major metal fittings are grounded and this appears to have saved us from major damage.  I had recently replaced (the day before the strike would you believe) a corroded copper strap joining the base of the mast to a keel bolt (whew).  US-manufactured boats apparently have to be grounded (unlike European-manufactured boats, I’m told) so avoided major structural damages because of this.  Wouldn’t like to repeat the experience however as most technicians simply recommend to replace everything, which of course is very expensive.  It did take quite some time to identify what components worked and what didn’t any more however, so it would probably be a waste of time (and money) to pay for a technician to try and work out where exactly the problem(s) lay rather than just replace stuff, which an owner can fairly easily do.  I plan to replace the sensitive electronic components asap.

You've just got to be there to appreciate these storm fronts
We, thankfully were not hurt despite my standing in the cockpit to watch the storm, as it suddenly changed direction and came directly toward us.  We heard a loud bang and then the First Mate, standing more cautiously on the companionway stairs saw sparks shower behind me into the water.  She said the fishing rods on the stern appeared to light up like Christmas trees. We were the only ones in the anchorage/marina who suffered from a strike that evening.  Our lucky day – yes and no!

Saturday, April 23, 2011

2009: Trinidad to the Chesapeake

We said goodbye to friends in Trinidad



























Work Completed Underway: 2009

We managed to escape Trinidad ….eventually!  The budget was somewhat depleted but we now had an autopilot - a tolerant and hardworking addition to our crew.  Our lives became a lot easier - although the self-steering, Burt was a bit miffed at being packed away!  More repairs underway took centre stage – always at the wrong time. 

Galley Bench.  The galley centreline bench was not attached at all to the stringer at its base on the floor, as it should have been and as shown in the Owner’s Manual.  I had to carry out repairs after the bench started shifting while we were sailing along in a seaway between Dominica and Guadeloupe; it was no fun for either skipper or crew!  Sadly, an example of lack of supervision in the manufacturing process.

Found an aquarium all to ourselves
in the Bahamas
Hose Clips.  I have also replaced quite a lot of old hose clips on fuel lines as we travel on. Loose clips allow air to be sucked in which occasionally cuts out the engine – and that never happens at convenient places or times.  We even found clips in out of the way places like Black Point (Exumas) so I now have a box full of various sizes and regularly check hose clips whenever accessing the boat’s plumbing.  Even though they are stainless steel an extraordinary number of them corrode and you only have to try and tighten them with a screwdriver/wrench and it soon becomes apparent when they no longer hold i.e. they easily rotate without tightening.  I throw these old ones away.

Engine Fan Belt.  The fan belt broke just as we were coming into a tricky anchorage at Normans Cay, the Bahamas!  The engine’s horn sounded and its dial showed a rather high temperature, but when I throttled down, I was able to lower the water temperature (I knew because the horn stopped blaring) and made for the anchorage at almost idle speed.  Not good when dodging coral bommies in an unfamiliar harbour.  After anchoring, I replaced the fan belt with a spare (fortunately) carried on board.  A very forgiving engine!!
Do you think they sell fan belts & hose clips too?

Wednesday, March 23, 2011

2008: Even More Work in the BVI

Nanny Cay, BVI: Part 3

Minor Repairs.
  Included:

  1. Small Crack in Hull Gelcoat.  Repaired, with epoxy filler, small crack in hull surface gelcoat about a foot above the starboard waterline. 
  2. Timber Repairs.  Numerous bits of furniture, floor lamination, etc were cracked, had come apart, floor laminate lifting, etc and these have generally needed simple ongoing repairs.  The floor panels, teak and holly, are often different shades and, one day, will need replacing.
  3. Stanchion Bases.  A couple of stanchion bases needed to be removed, re-welded and refitted.
  4. Some hairline gelcoat cracks around gunwales, to be repaired.
  5. Navigation lights on mast needed repair ie wiring or globe replacement.
  6. Purchased/fitted safety gear like liferaft, lifejackets, lifesling, flares, etc.
That's right - the refreshments were cold on Virgin Gourda too!
All these repairs, replacements, etc took two months for 2 people plus various contractors.  It was an intense time and we worked all day most days but it resulted in my feeling confident that WJ3 met many of our initial, important priorities.  We could safely sail away to St Martin (& its duty free marine goods) and then on to Trinidad to get out of the hurricane belt (at my insurance company’s insistence). 

It’s important to realise that although you are now in the water and sailing, there are still things that need to be tweaked or added to make life a little less “thrilling” or perhaps just plain common sense.  I’m not advocating for a reckless assault on boys’ toys to pimp up your yacht, just handy gadgets that add to efficiency, safety and comfort.


Crossing the Anegada Passage to St Martin

Tuesday, March 22, 2011

2008: More Work in BVI

Nanny Cay, BVI: Part 2

Plumbing.  One of the starboard water tanks had ‘sunk’ a bit in its recess and an inlet hose had come adrift, so it was leaking a lot of fresh water.  Very difficult to get to so I bunged the whole lot up with a bronze screw in plug.  It still does its job – just takes a little while longer to fill via the shared breather with a neighbouring tank. Replaced main cabin shower sump. Added additional length of hose to automatic bilge pump so that it sat on bottom of bilge – some plumbing lines appear to have shrunk a little over the years. Water tap to galley sink leaking and repacked with plumber’s tape.  Replaced washers in sink drains as they were leaking.

Fridge and Freezer - 110 Volt.  Repaired in BVI with new thermostat, plus one or two other things – worked fine afterwards.  Fridge compressor appears to be quite new.

Thankfully, the fridges at Josiahs Bay Bar worked well

Air Conditioning/Cooling Units.  New air conditioner fitted in port aft cabin to replace one that was heavily corroded and unserviceable.  Very expensive but earned its keep whilst in tropical ports. I made the mistake of throwing away the old computer card that had all the wiring coming to it – big mistake, as the technician was more than happy to remind me on several occasions.  I assumed that he would have known what to do but apparently that wasn’t so. 

Fans.   I’ve also added Hella fans below which are great – use very little electricity and they are very quiet – I wired them to the lighting wiring, easy and I just copied what the techhy did when installing the first one for me.

Hot Water Heater.  The hot water heater was internally corroded and had to be replaced completely – contractor did it but I would in future as it isn’t difficult and, of course, it would come with instructions, plus you would have the old set up to use as a guide.

As they were at Bomba Shack....
Batteries.  The original batteries were all well down on fluid and some cells in the house batteries had no battery acid in them at all.  In 2008 replaced the two 4D house batteries and the starter battery.

Tank Gauges. Several of these did not work. They will need fixing/replacing eventually.

Monday, March 21, 2011

2008: Year 1 - Work in the BVI

Nanny Cay, BVI: Part 1

After purchasing WJ3, I followed the surveyor’s report (made prior to purchase) to address those things that needed to be fixed.  Most of this work was carried out in BVI by me, my son (when not surfing or generally schmoozing) and contractors where necessary.

Bow Fitting.  Condemned in the initial survey, there were supposed to be hairline cracks in the bow fitting. I tried to replace it. Hunter sent me the wrong fitting though, so I had to send it back.  Eventually we had the original bow fitting stain tested; no cracks found, so we put it back on after reinforcing the bow area with more fibreglass.  This included replacing two damaged plastic rollers @ $200 each (wow!). Got my money back from Hunter after a lot of mucking around and wasted time. 

Anchor & Anchor Well. I purchased a larger anchor as one of my first purchases (a Rocna) – use it all the time with 300+’ of 5/16’’ tested chain (equivalent to 3/8’’ normal chain) – holds very well and digs in quickly -  great peace of mind, especially when you leave the boat on its own.  Anchor Well reinforcing bracket needed fibreglass repair as it had partially delaminated – did it myself. Enlarged drain holes to make them more flush with bottom of anchor well. Put plastic grating down to raise chain a bit above floor where there is often water sitting. A couple of studs in the anchor winch needed to be loosened as they had seized in place, needed to remove the winch to do it in a workshop.  Winch appeared to be fairly new but I had the electric wiring serviced and refitted.

Lifelines.  Replaced with all new wire and terminals by rigger.

New rigging installation by Richardsons in BVI

Mast and Standing Rigging.  Replaced all wire with new.  Had mast-steps fitted all the way up tot the top of the mast.  Spinnaker pole purchased and a mast track attached to the front of the mast, new wind instrument, main topping lift and halyard added, goose neck fitting re-bushed (plus a spare one purchased), repaired Selden boom vang fitting on bottom of boom by fixing the vang in place (rather than it sliding backwards and forwards which in effect meant it didn’t work), plus serviced mast and jib furlers.  Fitted new luff feeder for jib. 

Rudder.   I replaced the rudder that originally came with the boat – it had a fibreglass/carbon stock and there have been a number of failures on other boats.  Mine had a bit of water leaking around the join of the stock to the rudder indicating a crack perhaps.  Whether fibreglass rudder stocks are good or bad  (since some other boat manufacturers also use fibreglass stocks) could be debated perhaps however I wasn’t going to take any more chances than necessary and also Hunter sell stainless-stock rudders, which must indicate something.  Another Hunter 460 at the yard where I bought the boat also replaced his rudder for the same reason and the new rudders and their stocks appear to be very substantial – clearly a major improvement on the fibreglass ones.  Makes for peace of mind when sailing. 
 
Main Engine.  Changed oil, fuel filters, etc and had engine checked (twice).  Primary fuel filter also used to get a bit dirty and has needed cleaning but seems to have fixed any problems with regular engine running, turnover of fuel, and regular inspections/cleaning/changing of primary filter.  Cleaned up engine and sprayed with CRC heavy duty corrosion inhibitor – great stuff. Engine mounts may need replacement in future but appear to be ok for now.

Propeller Shaft Strut.  This needed repair as a line appeared to have wrapped itself around the prop shaft and bent the strut.  Prop shaft withdrawn, checked for straightness, and then put back.  Prop strut bent and needed removal and straightening before being refitted.  New cutlass bearing also fitted at this time.  Prop also needed a blade repaired.  All have worked fine since being repaired and put back together.

Engine Throttle Control.  This had to be replaced with a new one.  I employed a local guy to help me do this and it turned out to be the wrong way round ie when the throttle/gear lever was pushed forward the engine engaged reverse.  I fixed it myself in the end.

Northern Lights 6kw Generator.  Initially, new filters, oil changed.  Raw water pump bearing replaced by contractor as pump leaked. 

Saturday, March 19, 2011

Repairs, Replacements and Upgrades

Our priorities were fairly simple and dictated where our money went when it came to deciding what would be purchased.  Yes, we had a bargain boat but there were numerous repairs to be done and we wanted improvements that met our needs and that meant taking a month or two of each cruising season for the first few years to make our adjustments, and importantly to keep them affordable.

Safety (and security).  The first priority was to ensure the boat was sound and seaworthy.  We intended to live on board for 6 months each year and travel widely for at least 10 years.  That meant leaving the security of our purchase cruising-grounds (as lovely as they were – check out the BVI on the internet!) and see something of the world, albeit ever so slowly.

Comfort.  This covers a couple of concerns.   Firstly, we must have room to live comfortably for 6 months each year – WJ3 is our “home away from home”.  That means good mattresses, nice showers and loos that work.  It means room to store lots of books and space to sit and plonk away at the computer. 

Boating isn't always fun...

It also means having room to share with family and friends and not having to worry where to store sails, fishing rods and other gear that one accumulates on a sailboat.  Secondly, we are not getting any younger.  We don’t want to be overtaxed handling sails in big seas and strong winds or struggling to store the dinghy on deck at night (just to make sure it’s there in the morning!).

DIY.  I like to get to know my boat(s) at a personal level and that means being prepared to do-it-yourself.  Obviously there are some things best left to professionals – like replacing the rigging or setting up an autopilot – but on the whole, the more you are prepared to do yourself, the better.  Firstly, you get to know how systems work – always good when they break down (usually in the most remote of anchorages) and secondly, you can save yourself some serious money.  Professional rates can come in at more than $70 per hour.

Monday, January 17, 2011

Things I don't like so much....

Having graduated from the school of grumpy olds recently, this list is mainly about those irritating things that will pop up in your life and cause a drama when you least expect them to! 

Water Tanks.  5x plastic, which are fine, but I don’t know how you would ever get them out if ever they needed to be replaced ie they are largely covered by furniture.  One of them has lost its intake fitting and I have had to block it with a (screw-in) plug however seems ok since I can fill the tank via its neighbour.  All tanks are interconnected and have individual cocks (neatly together and easily accessible in a central console under the floorboards) but, from my experience, you also need to keep them open otherwise the water pressure system seems to malfunction.  The forward tank seems to empty first and can’t be isolated, which I would like to do to help keep the weight forward for hull trim.  I’m still learning. 
Cruising lets you see new places
Fuel Tank.  Aluminium 100 gallons but there is no inspection port so can’t clean it that way. In the event of grunge getting established you would have to use one of those expensive cleaning pumps which swishes the fuel around, pumping it in and out while cleaning it.  So far, I haven’t had that problem and this could be because the boat is a previous charter boat so that fuel was turned over relatively frequently and I also treat any fuel I put into it.  If the tank cracks at, say, one of its welds then one would have to cut out a substantial portion of the stern to get the tank out.  We have also used a fair amount of fuel so it has been turned over a fair bit and I also routinely check and clean the primary filter.

Complexity.  The boat’s systems appear to be complex but, if you want all the bells and whistles, then one probably has no choice.  The owner’s manual helps a lot too however it does mean that there is more to go wrong, as it inevitably must.  See my ever-growing list of stuff I have had to repair/replace or upgrade along the way.
And chat to a few locals about good fishing spots 
Rudder.  One aspect of these balanced rudders – like most production boats – is that the rudder base is almost level with the bottom of the keel and they have no skeg in front of them so could be quite vulnerable in a grounding.  This fact has made me very careful whenever I approach an anchorage – I watch the depth sounder like a hawk.

Stern Cleats.  The Hunter 460 stern is quite unique in that there is no side deck at the stern that one can walk around when handling docking lines – you need to attach lines from the cockpit.   The mooring cleats are a little small in my opinion ie they can really only take one dock line comfortably, although there are three each side, which is good.

Improve your diet
Deck Lining.  The internal deck lining is a mixture of rigid plastic and soft coverings that are easily marked and/or distorted.  One day I will rip out the soft covering and replace it with something like timber battens or ply so that I can easily access all the bits and pieces attached to and under the deck - wiring, etc.

Internal Moulds.  They are good when it comes to keeping clean and cleaning showers, etc but also some will need partial destruction if and when I have to replace water tanks, etc.  Fortunately there are quite a few internal access plates that can be unscrewed for access to electrical junction boxes, winch bases, etc.

Access to Engine.  See above, generally good except that the port side is, to an extent, covered by one of the galley benches.  The bench can be only partially removed and it is a bit of a chore, not assisted by the plumbing pipes to the sink.  The raw water pump is also located in a very inconvenient position on the port side of the engine and faces aft so I’m not looking forward to having to replace the water pump impellor when next I should have to.  I have also had to reinforce the bench mountings as it moved around a bit in a seaway ie the screws that should have attached the base of the bench to a wooden stringer were not in fact in place ie they had never been fitted as indicated in the owners manual.

Thru Hull Fittings.  There appear to be hundreds when you first look although, at last count, fourteen.  Most sea water intakes could be via one or two fittings I would have thought – one back one front – although outlets might have to remain.
Enjoy a little music
Stern Pushpit and Stern.  Not as large as some other boats this size and now a bit crowded with davits, Lifesling, lifebuoy, barbecue, flag holder, fishing rod holders(2), outboard & bracket and an outboard crane.  Windvane self steering gear also takes up one side of stern when fitted. 

Attention to Detail. Such as screws on interior furnishings!  Initially I was constantly replacing wood screws on interior furniture because they had become loose and no longer held.  I am using more substantial self tapping screws as I replace the older ones.  Some of the screws didn’t actually attach to anything eg occasionally they missed the piece of beading, etc they were supposed to be attached to.  The galley centreline bench was not attached at all to the stringer at its base – I had to do that after the bench started shifting while in a seaway!

Portholes.  The rear portholes in the aft cabins seem to line up with the deck overflow.  If it rains, and a really silly crew member/guest forgets to close those ones in particular, water just flows over the side of WJ3 and floods into their cabin.  On to the mattress - never a good thing!
Then go shopping for staples

Saturday, January 15, 2011

What I liked about the Boat...more

St Martin. Hanging out at Time Out Boatyard - note the BBQ we purchased there!
Making Decisions: Part 2

Manoeuvrability. The wheel steering is light and the boat responsive, especially when manoeuvring around a marina.  It’s also well balanced providing the sails are set properly, same as any other sailing boat. Big fella though and so need to be careful and well fendered when approaching a dock (I’ve got 10 fenders). 

Ventilation.  Very well ventilated with lots of opening aluminium hatches (8 on top, 8 on the coach house sides, 2 on the hull in the quarters and one into the starboard side of cockpit: total 19.  Allows lots of air to circulate which is great in the tropics but also requires some frantic scrambling to close them all when it suddenly rains.  

Galley.  Large and seaworthy ie the galley largely runs fore and aft allowing the cook to wedge in securely between the two fore and aft benches while sailing.  Force 10 Marine 3 burner gas stove, with oven, plus deep 110 volt fridge and freezer (freezer keeps things frozen but does not freeze stuff unless you are on shore power) plus a fair amount of stowage.  Double deep sinks.  Microwave oven fitted.  When at a marina you can use continual shore power to continuously run the fridge/freezer - plus air conditioning, etc.

Generator.  I didn’t particularly seek a boat with a generator but this boat happened to come with one, plus two air conditioners.  A bit luxurious but very nice on a hot day and when at a marina.  At sea, I run the generator twice a day to charge batteries, run fridge/freezer and sometimes air conditioning for the cook (necessary in the tropics) when preparing meals.  Northern Lights generator, very good but works harder than anything else on board.  Need to check water intake strainer routinely to check it does not clog with any debris, especially in harbour, and regularly check coolant.

Internal Grid System Glassed to Hull.  The Hunter’s internal grid system is actually glassed to the hull, rather than glued like some other production boats, and so are the knees for the chain plates – quite substantial.  No/little noise from hull twisting, bulkheads rubbing, etc but there is some noise at sea in a swell.

Gelcoat.  The gelcoat shows no signs of osmosis.  I understand it includes isothalic resins which are supposed to resist osmosis plus some Kevlar around the bow area.  Surveyor reported gelcoat in above average condition.

Deck to Hull Joint.  I think the Hunter approach, ie deck attached to hull with sealant, and bolts through a flange facing outwards, makes a lot of (common) sense – keeps any leaks outside the hull.  It has a ‘rubber’ flange over it which also acts as a rubbing strake.  This arrangement might also be one of the reasons why the boat is quite dry.  The rubbing strake is a very good idea – I’ve tested mine on docks at least on one (or two) occasions.

Rudder.  Balanced rudder makes for easy manoeuvring and steering.  Most production boats have balanced rudders these days.  Rudder had a fibreglass rudder stock.

Mainsheet.  This is mounted on a substantial stainless steel arch which is part of the bimini.  Out of the way so that boom can’t hit heads although not quite as easy to operate as a mainsheet system mounted in the cockpit. You get used to it.

Canvas Work.  Great bimini over back of cockpit makes for good shelter from the sun and rain – well reinforced with stainless tubing. 
Protection from all sorts of things under the bimini
Lights.  There are lights and power points everywhere, plus shore power plugs for the 110volt system.  There’s as much electric cable as a house – 12 volt and 110 volt – which can be a good thing but can also be not so good ie complicated, with wires running everywhere.  I’m determined to become an electrician so I can understand it all.

Tank Capacity.  Plenty of water (200 gals) and diesel tankage (100 gals) however see NOT LIKE section.  Need to fit a manual water pump for the galley – everything electric.

Owners Manual.  The boat comes with its own comprehensive manual – thank goodness.  The boat has so many systems that you need it and particularly for electrical tradesmen when they come on board to fix stuff.

Anchor Well and Anchoring.  I can stand up in the well so there is lots of room.  The well floor is well above the waterline, so drains well when at anchor.  Self draining although I’ve added some plastic grating at the bottom so that anchor chain is not continuously immersed in a small puddle of water.  I filed the drain holes at the bottom so that the anchor well drained more efficiently thereby minimizing the amount of water that sits in the bottom of the well.  The anchor winch Lewmar is one of our favourite devices and easily handles our large Rocna anchor (33kg/72lb) and all chain rode.  Anchors that came with the boat are 45lb Delta and 40lb Danforth, which I tend to use as secondary or stern anchor when I have to, each with 50’ of chain plus 5/8’’ line (length as required) – a ‘blend’ of nylon and polyester.  The chain and rope solution makes it easier to put it all in the dinghy and then lay it down as I motor away from the boat.  The bow fitting rollers allows for the anchor to drop itself when lowered ie the anchor doesn’t need to be pushed.
Room to snooze in the cockpit
Sugar-Scooped Stern.  We love the sugar scoop stern with boarding ladder, lockers, etc. It’s easy to take an early morning swim, get back aboard then shower with the stern shower – lovely!  The steps allow for easy entry and exit to the dinghy plus a great place to catch then clean fish so that smelly blood etc is kept out of the cockpit.  Older or less able-bodied visitors really appreciate this access. The lockers hold heaps of stuff – spare anchor, shore power leads, mooring lines, buckets, fishing gear, etc etc.

Thursday, January 13, 2011

What I liked about the Boat

Making Decisions: Part 1

There are so many things to like about our Hunter 460 that I've broken it down into 3 parts.  If nothing else, it will help when deciding what is important to you and your style of cruising. 

Price.  Let’s not mince around here, it largely comes down to cost in the end notwithstanding the importance of the boat being strong enough to cross oceans, etc.  I haven’t heard of any Hunters falling apart.  The Hunters, I think, provide very good value for money and they have a modern fitout.  At the end of the day, a cruising yacht is a bunch of systems and the actual hull is only part of it eg on this boat mast and furlers are Selden/Furlex, hatches Lewmar, Edson steering, sheet/halyard winches Lewmar, anchor winch Lewmar, engine Yanmar, generator Northern Lights, and so on – all good quality.  We wanted a vessel that was comfortable to live on/cruise in for six month at a time. 
Size.  It’s a good size for both of us with plenty of space for family or friends that might like to join us.  Below decks we don’t trip over each other and can have a choice of bathrooms and toilets.  Good privacy.  My crew said she wanted a cruising boat that would be large enough to get away from me (when she needed to) and so around 45’ seemed about right.  Our boat back home, WJ2, was 38’ long with an 11’ beam; WJ3 has twice the volume inside.  You do have to get used to the size though – it’s a big boat (for me anyway).

Accommodation.  In a word - roomy.  Two bedrooms and a third bedroom converted to a store room make it comfortable and uncrowded (relative to smaller boats).  Beds are queen sized and there is sufficient head room in the aft cabins not to feel squeezy.  Plenty of lockers and drawers; life is still fairly minimalist though, even on a 6 month cruise.  Three showers – one per bathroom and one on the stern for when you get out of the water after a swim.  The stern shower gets much more use than the other two showers.  Air conditioned, hot and cold pressure water.... quite luxurious really.
Interior Woodwork.  There’s plenty of it, it’s not varnished and it gives the interior a nice woody look, offsetting the plastic hull/coach house liner.  Very nicely done.

Sailing Performance.  WJ3 sails well although not so well in light airs – needs a bigger head sail at times.  The boat feels solid and is relatively dry when bashing close hauled into the short chop of the Caribbean.  Pounds a bit but that’s modern sail boats.  A delight when broad reaching.  Sails set well and the jib remains well set no matter how much it is reefed – a yankee sail – and there is no need to move the genoa car.  The main also sets well.  Well done Doyles.  The Hunter is also easy to set up and sail singlehandedly, a great advantage when there’s only the two of us onboard for long sea passages.  Previous boats of this make and model have been sailed around the world and one singlehanded, so this influenced me to go for this particular model. 
BVI to St Martin over the Anegada Passage
Easily Handled. The in-mast mainsail furler and headsail furlers are quite easy to reef and let out, although a bit of muscle is required – good exercise but this might change as we get older.  I tend to use the winches while furling manually ie wrap the jib furling line on the winch and haul on the line without using a winch handle.  This way I don’t over tighten and break something if the line gets caught, for example (which has happened to others).  It is also quite easy to walk all the way around the boat, which makes anchoring, docking and handling lines & sails safer and faster.  My First Mate really likes WJ3’s flatter bottom, which keeps us on a more even keel, so “we don’t lean over too much”.  Ahem, we’re cruisers not racers…..