Showing posts with label contractors. Show all posts
Showing posts with label contractors. Show all posts

Wednesday, February 24, 2016

2015: In the Marina & Keeping Busy

Preveza Marina: (Part 1)
A view over Preveza Marina.  Yes, another trip up the mast. 
To work out why the mast head light is still flashing...

Preveza in splendid summer colour
Making Life Easy.  In 2014, we'd discovered a neat trick.  Having spent too much time on the hard in boatyards over the years, we experimented with the options Preveza offered.  We'd found & booked space in the Preveza Marina a week prior to haul out.  Aside from its perfect location at the quiet end of the town, we could make most of our "leaving the boat" preparations with quite a few more conveniences.  Haul out was made with only a couple of days (not weeks or months!) on the hard before flying out.  This experience turned out so well, we gave it a shot again at the start of the season - only in reverse.  Splash after a few days then put-put over to the marina.  Perfect.
Generator Would Not Start.  I tried and tried but it started only after a lot of attempts.   I thought this was probably because the generator had been idle for eight months or may be the glow plugs weren’t quite right.  The next day when I tried, the engine would not turn over properly.  I cleaned all the terminals I could access and the engine started but then wouldn’t turn off when I pushed the cut off switch.  Finally, I managed to stop the engine by removing a ‘plug’ on the circuit board.  Time to call in the professionals! 

So, called on Stefan (yet again!) and, after an hour and a half of tracing circuits, looking at wiring diagrams, playing with switches, trying to start the engine without success, we found that the cut off wire goes via a water temperature sensor  on the engine block before it connects with the cut off terminal block.  This wire terminal at the temperature sensor had simply fallen off and so there was an interrupted circuit.  Once Stefan re-joined the wires all was as it should be and everything worked.  I have stated before that while cruising you meet some of the nicest people in the world that work on boats and Stefan is one of those.  He was so mortified that he didn’t find the fault quicker that he made his bill (we thought!) ridiculously cheap. He is also one of those people who is more than happy to explain exactly what he is doing and why, so I always learn heaps from these guys. 


Oh look!  Our new neighbour is another Hunter
Anti-Siphon Valve Broken.  Well, not quite.  I had retightened the hose clamp near the engine water inlet pump, several times, but it still leaked from there, or so I thought.  When we stopped in a marina we pulled the cover off the engine and, after starting the engine, it was soon plainly obvious that the water leak was coming from the siphon break, which sits a couple of feet above the raw water inlet hose.  One of the plastic fittings of the anti-siphon valve had sheared and it was slowly but constantly dripping water down on to the raw water inlet hose and then running along the bottom of the hose to the water pump.  Duh!  But what a coincidence – it never occurred to me that it could be anything but the newly fitted water hose.  Anyway, the broken siphon valve was easily replaced and all works without any water leak.  I might add that Stefan assisted with this discovery and repair too.

Sunday, February 21, 2016

2015: In the Yard & Keeping Busy

Preveza, Greece

Welcome to 2015....... Who'd a thought!

In the Yard
(The plan this year was to do a loop of the Adriatic ending back in Preveza.  Given all the work we'd done on WJ3, we figured on an "easy" prep time in the yard...  Of course you'd never believe that just didn't happen.  Our plans were delayed - big time - and we had to cut short the route.  Still, I'm probably not telling boat owners anything new.) 
All's quiet at Aktio
A view from on high
Engine Raw water inlet Hose.  Last year the hose started to leak and I taped it up (with you-beaut very stretchy silicone tape) so it no longer leaked.  Nevertheless, the hose was clearly failing so this year I replaced it, this time with clear stainless steel reinforced hose.  It runs cold water only as it is between the inlet raw water filter/strainer and the raw water engine pump.  This hose was different to the ‘black’ hose I threw out (which was also looking decidedly worse for wear and likely to leak in one or two other spots) but advice was that this clear hose was quite adequate for the job and, besides, you can observe the water in the hose.  So, as soon as it was fitted, would you believe, there was another water leak – water could be observed/felt dripping from the (new) inlet hose near the water pump.  See up-coming post for the result under Siphon Valve Broken.
Sewing.  The dodger, bimini and the dinghy boat cover needed extensive resewing of most seams plus some repairs to rips in the bimini.  Stitching has been the first to go on these coverings, unlike the acrylic which seems to last forever, and the more I repaired the more I found it needed work. 

It’s quite simple really, just pull on the area around a seam and, if the sewing comes apart easily, then it needs to be resewn.  I reckon I did most of the bimini and dodger.   Same for much of the dinghy cover. 

The (summer) awning also needed repairs and I discovered that ‘shade cloth aint shade cloth, Sol’.  Our shade cloth is easily chafed so I will replace it next year even though it’s only a few years old.  Many boats use shade cloth and they are not well supported on the boom etc and flap around madly, unlike our awning which was made to measure and is well secured to stays etc.  Nevertheless, they don’t seem to damage as readily as ours has done.
Baby donkey had grown quite a bit during our absence
Standing Rig Check.  Our insurers, Pantaenius, asked for a rig check as the rigging was now eight years old.  A local rigging company in Preveza duly obliged and the rig was thoroughly inspected over the space of an hour, no problems found and passed by insurance.  The riggers were a couple of local guys, as helpful as could be with all sorts of advice and just thoroughly nice blokes.  Their shop is located at Cleopatra Marina.
Chandlery.  We'd discovered Cleopatra Marina/Boatyard's well stocked chandlery and obliging staff on arrival in 2014.  And made very good use of it in 2015 too!
Another view over Preveza taken whilst servicing the mast
Can you just imagine Cleopatra & Augustus having a big boating battle in here!

Friday, February 12, 2016

2014: Lessons in Anchoring & Pest Control

Preveza, Greece

(Temporarily) Lost Anchor.  I’m saving the best until last!  On our visit to check out boatyards in Preveza we anchored off Aktio Marina, in about 25’ depth of water.  We were then asked to go in and tie up alongside one of Aktio’s groins to drop off our mainsail and outboard for repairs.  We could stay there too until repairs were completed - bonus!  The crew duly raised the anchor and when she turned to me, as she does, to tell me that the anchor was raised so that I can then power away, she advised (somewhat hesitatingly) that there was NO anchor.  I questioned this unwelcome news but it was repeated, more forcefully this time.  Sure enough, no anchor was what I found when I strode purposefully forward to confirm said crew’s statement. 
On instruction,  she dropped all our chain hoping that would slow any drift.   I then quickly dropped another anchor we had on rope and there we sat.  Luckily there was little tidal movement at that time but we had moved a bit.  I donned snorkelling gear and searched in murkyish waters, no luck.  GS then surveyed where she thought we had been when we pulled the anchor up and directed me accordingly.  First dive down and there was our much loved Rocna anchor sitting nicely, with the pin lying neatly next to it.  It must be that woman cave thing!  We recovered anchor and chain, joined them together again and recovered the second anchor.  Much discussion followed. 
The anchor is where?  Out there - somewhere!
What we did was enough as it turned out but if it happens again I would hit the Man Overboard button on the chart program almost immediately then do what we did.  Luckily we were in reasonably shallow water.  Why wasn’t the pin moused down?  Well, you can’t with these new stainless steel swivels that have a pin that sits countersunk and is done up using an allen key.  You need to screw them in as firmly as you can and observe "often" for any subsequent movement.  Also check them regularly which we now do religiously.  I would also consider lock tight on the thread and will research this a bit more.  Yes, you can also utilize a tripping line and buoy but they have their disadvantages too and we haven’t gone down that route.

Rats Onboard.  We subsequently stayed on the groin for several days and were able to use the marina’s facilities while there – very nice.  One visitor however, was not welcome.  A foraging rat decided to join us late one night though thankfully did not get inside before being given a karate chop incentive, through an open hatch in the galley, to move on.  Ratus Sparticus learned to fly that night.  Next morning we gathered & cut a crate of plastic soft drink bottles to assemble our rat defences.  We never saw him, or any of his mates, again.  It goes to show that you can never be too careful when tied up in a marina or at a dock.

Despite these shared experiences, Aktio is highly recommended for a haul out yard. 


WJ3 looking somewhat bohemian in her plastic "rat discouragers"

Thursday, February 4, 2016

2014: Repairs Underway in Preveza

Ionian, Greece: 2014

Preveza Marina - getting ready for haul out
Companionway Step.  I managed to break the side lip on the bottom step of my companionway ladder while standing on it; replaced it with the top step and in turn had that replaced with a flat piece of timber (bamboo actually – a cutting board).  The original steps curl up at the edges and so they are particularly important on the bottom step as there is nothing else to stop one’s foot sliding sideways.  The other five above all have stainless railing to support your foot and prevent it sliding.  The companionway steps are one of our most loved parts of this boat ie a gentle rise, rather than a steep one like many other boats, and at rest it is quite easy/safe to carry a drink in each hand while ascending, without spilling anything.  I actually now prefer my new top step/cutting board as it is bigger than the original.  It’s fine at sea too.
Light Connections.  Located and repaired electric connections (that had come loose over time) for a bunch of cabin lights over the galley and in the store room.
 
Floating through the Corinth Canal
Leaking Fresh Water Tank.   For several seasons I had always wondered as to why there was water pumped from the bilge whenever we refilled the water tanks.  It only occurred a few of times then it would stop altogether.  To cut a long story short this year I heard a strange sound while refilling the water tanks and lifted some of the flooring access plates.  I could hear a hissing gurgling sound and sure enough one of the (five) plastic water tanks had a small slit at its top.  

I could feel it but not see it as most of the water tanks are hidden from view under furniture.  As it is, I can’t get to it to repair it and would have to lift some flooring and may be some of the galley furniture (which is not removable as far as I can see) to be able to do so.  I believe that you can repair these tanks with plastic welding but you need to be able to get to the damaged part relatively easily.  It looks easy on You Tube.  So, I’ve had to leave it and I use this tank first off whenever I refill tanks.  Fortunately all tanks can be isolated from each other using the ball valves for each tank located near the fresh water pump.

Starter Battery Died.  At the island of Meganissi, on the Ionian Sea and not very far south of Preveza, the starter battery died.  Working fine one day, not the next.  Fortunately, Meganissi was only a 20 minute fast dinghy hike in Bruce to a decent chandlery on Lefkadha and I was back on the boat in an hour and a half with a brand new battery.  No further problems.  I did try to use jumper leads from the storage batteries to the starter battery but it was not enough to turn the engine over.  I’m sure there must be another solution and will let you know when I find it out.  What if one were far away from civilization and the starter battery died?
At the marina, we had time for side trips
Maintaining Stainless Steel.  This year I made a startling discovery.  To keep the stainless clean and shiny, with minimum rust marks, clean it with fresh water.  It gets very salt encrusted as you cruise around and builds up rust stains but, rather than leave it until the end of the season or on visits to marinas where there is plenty of fresh water to hose them off, just wipe them with a wet rag of fresh water every now and again.  We carry four jerry cans of spare fresh water but you really don’t need to use much anyway.  A bucket half full will easily cover all the (considerable) stainless railing around the boat.  Anyway, just remarkable, no need for polishing all the time (which I rarely do although I always feel guilty for not doing it).  I suppose everyone else out there knows this simple technique but I had never read about it.  I just discovered it by accident. 

Generator Raw Water Develops Galloping Diarrhoea.   About a week or so before we reached our port of storage at the end of the season (Preveza), the generator shat itself and the drip tray was full of dirty brown water.  The raw water pump bearing had died again (last time seven years ago) and so it was leaking lots of water from the engine cooling system.  No other damage resulted as water was still being circulated around the engine but the generator could no longer be used.  We had it repaired once we were on the hard by a very helpful German mechanic, Stefan, arranged for by the yard – Aktio Marina.  This was to be the beginning of a growing but unwelcome relationship - only because of too many boat bits needing TLC!  Our relationship continued on in 2015.  The Other Woman is loving the attention....

2014 - an Interesting year for repairs!
Aktio Boatyard, Preveza - Haul Out

Saturday, January 30, 2016

2014: Repairs Underway in Poros

Poros, Greece

Raw water inlet hose on engine started to leak, just a few drops every minute.  I hate water inside the boat at the best of times so, having found the leak by feel, I bound it with some very stretchy tape that I carry on board which is designed for just this sort of eventuality.  It stretches about four to five times (I’m guessing) its original size and you wrap it around whatever you want – it sticks to itself if you don’t ruin the sticky part with grubby fingers.  I also wrapped some duct tape over that and it stopped leaking for the rest of the season. 
We had a great trip north up the Turkish coast from Marmaris, with some
isolated anchorages, clear waters perfect for snorkelling and amazing
ruins (like Pergamum) to explore along the way.  Highly recommended!
Continuous Furling Line for the Mainsail.  It needed replacement I thought as it was looking a bit hows-your-father.  Tried at the Marmaris marina boatyard sailmaker but, by now, we weren’t talking to each other so no luck there.  Tried other contacts but, although promising to get back to me, didn’t.  At this stage we were on anchor just off the Marmaris boatyard and, I have to admit, I sensed  a lack of enthusiasm by tradies to work on boats when at anchor (perhaps they worry about getting paid before boaties sail away in the night).  So, we gave up trying and departed Marmaris still with the original line and it lasted fine (for quite some weeks) until reaching the west coast of Greece and about to enter Poros, with a good wind blowing.  I started to furl the mainsail, probably under a fair bit of pressure but not as much as we’ve experienced before, then, bang, the line snapped.   I simply furled the main using a winch handle on the winch on the mast. 

In Poros there is a popular chandlery and the staff there were very helpful, selling me some new line and also arranging for someone to come out the next day to do the splice.  I might add here that the furling line is braided, this splice has to be pretty much exactly the same diameter as the line is so it will easily run through a bunch of blocks and winches, while at the same time be almost as strong as the line itself. 


The one that got away!
We had arranged that I would meet the ‘splicer’ the next morning and take him to and from the boat, which was on anchor.  The chandlery man very kindly came along to the pickup point to make introductions and off we went.  The ‘splicer’ was a local, in his late seventies, couldn’t speak English and had a gammy leg (at least one of them).  On arrival at Windjammer he almost fell into the water as he endeavoured to cross from the dinghy to the boat at the stern (it doesn’t get friendlier than this let me tell you) and all crew had to come to the rescue – it was a near run thing.  

Unperturbed he set about his business and nothing I could say would influence him as he went about his task.  Anyway, after an hour of honest toil I had a splice that did indeed slide through all the sheaves and winches but with about 5% strength.  We all agreed that it was a fine effort and I duly returned him to shore, paid him the agreed amount plus a healthy tip, and we parted on very good terms.
We had spectacular scenery through Greece too. 
This is Cape Sounion.
I now did what I wanted to do in the first place – do it myself.  I had watched YouTube for ‘how to’ instructions several times and also had written instructions to refer to.  It was a fairly easy fix by following the instructions.  The hardest bit was the three splices you have to stitch in place to hold the joins neatly and securely together – it took me two goes to do a neat job ie making sure the rope’s diameter was not increased so it easily moved through blocks and jammers.  Very satisfying effort in the end!  Why didn’t I do it myself in the first place?  Well, I thought that for such an important repair I would watch an expert do it first, then do it myself next time.  Oh well, he was a lovely old bloke and it was one of those magical experiences you only get when boating.  We also think he’s dined out a few times with his mates on the strength of his “near death” experience on our sailboat.   In 2015, when the rig was checked by professional riggers for insurance, they noted that the furling line is too stretchy and too large so I may replace it next year.
Outboard Doesn’t Go Fast When Powered Up.  In Poros, one night we headed into shore for dinner and since we were anchored a fair distance from the town docks we sped into town at best speed on the plane.   Our 15hp RIB dinghy ‘Bruce’ can tow a skier.  On the way back to the boat we motored along fine but when trying to get onto the plane the engine would rev madly but not have the "umph" to get the boat going on to the plane.   We could still use the dinghy but only at slow speeds.  I checked the prop and it seemed to be locked in ok and couldn’t find any fault with the gear box.  When we eventually got to Preveza the first time to check out the boatyard, we gave the motor to the mechanic arranged by the Aktio Marina.  The mechanic took the outboard away and next day it was back with a new propeller fitted.  Seems that the old prop had worn its gearing so badly that it slipped on the gear shaft at high revs.  So, there you go, I certainly didn’t think of that.
Poros is the quintessential Greek island village

Thursday, January 21, 2016

2014: More Repairs in the Marina

Marmaris, Turkey: Part 2
Work in the Boatyard continues....

Anemometer Smashed.  On checking our electrics etc after returning to the boat I noticed that the anemometer (wind meter) was not showing any reading.  It was on at the screen but not indicating any reading of wind speed or direction.  On checking the masthead through the binoculars I couldn't see it.  I climbed the mast only to find the plug all by itself without the usual staff, with windcups and wind vane completely gone.  I made enquiries of the locals and was informed of a massive hail storm experienced some months beforehand and presumably the wind vane was cleanly knocked off the masthead.  It wasn’t difficult to source a new one and install it.  Just another expense!
Although it doesn't look like it, a storm of 30kts blew over soon after we
arrived at the anchorage off Yat Marin at Marmaris.  Welcome to boating!
And I hope everything is working, including the anchor....

VHF Antenna.  I had previously noticed that our handheld VHF radio had a better range than the mounted VHF radio.  Turned out, after a lot of checking, that the cable plug where it entered the back of the radio had lost its solder from its core.  Our antenna cable has a join at the base of the mast so I only had to remove the cable between radio and mast (thank goodness) and not the cable going up the mast to the masthead antenna.  Had it repaired by a friendly local technician (a lady) in a local shop at the marina, reinstalled it and everything ok again. 
Window Screens.  Our two forward fixed deck windows have mesh screens permanently in place, attached with press studs, which do a superb job, in addition to the tinted windows, in keeping light to a comfortable level inside the main cabin. They were old and needing repair so had them copied by a canvas maker in Marmaris town proper. A superb job & the screens fitted perfectly. 
Marmaris for Work Done on Boats.  Marmaris is probably one of the best places we have had work done in all the places we have been to ie a balance of fair quality work for a very reasonable price, bearing in mind my other observations.  There are plenty of tradespeople to choose from and so there is good competition even at the Yat Marin Marina.  If you didn’t like one or two quotes there were others to approach.  You can actually get firm quotes although in one case one quote was only an approximation which turned out to be much less than the bill ie regassing the fridge in 2013.  The quotes did vary markedly so this is a great place to shop around.  There are also a heap of yacht services in Marmaris town but you either approach them directly or you need to get permission from the marina before they are allowed to work on your boat at the marina, which in our case wasn’t necessary.

Off Datca under a full moon
 

Monday, January 11, 2016

2014: Repairs in the Marina

Marmaris, Turkey: Part 1

(Finally there's a bit of time to update the H460 blog...between bouts of boat maintenance and house renovations!)

Life on the Hard - with unsurpassed views
Sails Cleaned and UV Stitching Replaced.  I took up an offer at the marina sailmakers in 2013 to have the sails washed and inspected when we stored the boat on the hard in Marmaris.  It was all quoted and we left the sails with the sailmaker to pick up on return in 2014.  I left a deposit (payment of 50% was what the rules said) and, I noted accordingly on their invoice as the sailmaker doing the paperwork said she was not going to issue a receipt just now but when I paid fully next year.  Okey, when in Rome …  To cut a long story short, when I went to pick up the sails she denied any payment having been made.  I pointed out my note and she said ‘this has never happened before … la la la … but I was not backing down.  So, she reluctantly accepted my point and the balance.  I complained to the sailmaker manager only to find out that everyone working there is family so no real point taking it further with that lot.  I was quite prepared to take it up with the marina manager but not really necessary as it turned out. 
All the stitching on the UV covers was redone however, so overall I got what I paid for.  Big lesson, whenever making a payment always get some receipt or, if in Greece where they don’t know about receipts, make some note of any payments, like I did with this lot.
Bike Bags.  Before our falling out I had also purchased a couple of big old sail bags quite cheaply and we use them to store our bikes in – much neater and good protection from the elements as we put the bikes in the dinghy on its davits when sailing.
I also needed my continuous furling line replaced but, at this stage, the sailmaker was not interested, for obvious reasons.  For my solution, see below.
I should also have included the webbing on the clew of the mainsail to be restitched, but didn’t (my fault) and paid the price - more on that later too.
 
A very professional launch in Marmaris
Boat Detailing.  At the marina, very shortly after being placed in a cradle on the hard in 2013, I was quickly approached by a few of the private tradespeople that occupy their own workshops around the wall of the marina.  I accepted one quote to polish the topsides and stainless steel and also to undertake professional gelcoat repairs to hairline cracks and other minor scratches and repairs that have appeared over the years on the deck and topsides.  It also included one coat of antifouling to the bottom and he also raised the waterline around the stern as requested.  All for a very reasonable price.  He also undertook to wash the boat down each month while we were at home and that he would let me know when he had done so each time.  He gave me contact details of previous customers whom I contacted and they were generally pleased with his work.  One said don’t make the final payment until the boat is back in the water as his staff did not do the final anti fouling on the spots on the hull that can’t be done while the boat is in its cradle.  As it turned out on the launch day it was more convenient for me to do it myself anyway.
All the work was carried out as promised except I had to chase him up about the wash downs each month.  When I did enquire he answered promptly and also gave me updates on the work to be, and being, done.  He only required a very small deposit before I left, a part payment shortly after I returned, and then the balance on completion of all the work ie when the last dabs of paint were put on when the boat was picked up for relaunching .  Highly recommended providing you take an ongoing interest in progress etc.
Turkey's coast is a picture postcard delight

Friday, December 27, 2013

2013: End of Season Comments

Repairs & Maintenance Underway:

Spinnaker Furler  - a further comment… (Spanish Experience).  Well, we didn’t purchase one this year as the particular Profurl model I was after didn’t have any torsion lines available.  They were coming up with an improved torsion line as it turned out and it is now on the market – it looks much better than the original (it appears to have all these little balls on the line which, I assume, makes furling more efficient).  The winds we experienced on our voyage this year didn’t really suit flying spinnakers ie on the nose or, if in the right direction, too strong to fly a spinnaker on a cruising boat.  Something for the future perhaps and it certainly remains on my shopping list.  I will also purchase a removable bowsprit to get the tack of the spinnaker forward of the pulpit.
Some subscribe to really slow boating
Broken Dunny Seat Hinge.  Someone sat down too heavily on our guest dunny (I think it was me) and a hinge broke making it very unsafe at sea (just use your imagination).  New hinges were purchased and one of our guests was asked to take off the old and attach the new (using stainless steel screws this time – why Jabsco use normal steel screws on a marine toilet seat escapes me as they are otherwise an excellent product) while the skipper did other things.  Apparently, it was quite a performance to remove the old screws and hinges but I did realise how “handy” or self-reliant boaties must be in general to keep our boats ticking over and in good working order.  Anyway, the throne is all back together and providing safe seating once again.
Fridge Repairs Underway.  In Greece our fridge and freezer gradually lost most of its refrigerant/gas.  We had to revert to our trusty and reliable (touch wood) Waeco.  Some friendly Canadian neighbours we shared an anchorage with at Kuruca Buku, Turkey had a handheld refrigerant leak detector.  This worked a treat and we quickly identified the leak along the gas line at one of the fittings.  A bit of a tighten with a spanner and no more leak.  When we arrived at Marmaris a fridge technician topped up our gas, checked for any further leaks and we were back in business.  It makes a huge improvement to life on board (for the galley slave particularly).  I will purchase one of these detectors and use it to scan for leaks every week or so – they only cost around $30-50.  If I had done this earlier I would have detected and fixed the leak and regassing is not cheap.  This experience also speaks volumes about cruising camaraderie - somewhat in short supply in a touristy Med.  So, well done & greatly appreciated!
Sunset over Ibiza, Balearics

Sunday, December 15, 2013

2013: Year 6 - Work in Lagos

Sopromar Boatyard:
Time to get our hands dirty again!
Bow Thruster.  I’ve just lashed out and had a new one fitted in the bow – I would have liked to have both a bow and stern thruster but the boat doesn’t have enough room in the stern – too much other stuff.  I’ve been sort of avoiding fitting a bow thruster, almost as a matter of pride (plus they’re not cheap) and, after I’ve bumped my way around a marina, I could always say “well, I don’t have a bow thruster like you people.”  I’ve also seen a number of times skippers playing with their bow thrusters, and at the same time getting into difficulties, when they should just be motoring forward into their berth.  However, just about everyone I’ve met that has a bow thruster seems to swear by them.  So, providing mine works okey I’ll not have any more excuses when manoeuvring in and out of marinas.  Its been professionally fitted at Sopromar Boatyard.  No fuss!
We arrived to a new bow thruster (WJ3's now sprouting nostrils)
Spinnaker Furler.  We have a cruising chute which hasn’t been getting enough use because it’s contained in a sock (which is good) but requires a bit of work to set and take down.  We can both envision me getting wrapped up in a chute, going overboard and Galley Slave left to sort everything out, return to pick me up and us both being terribly traumatized by the whole event.  Much better to do everything from the cockpit, just like we (almost) do now.  So, I’m presently trying to purchase a spinnaker furler, which is not as easy as it sounds.  Anti-torsion lines are a real problem to obtain apparently and so I’ve been trying to make this purchase for a couple of months now.   I’ll report on how things turn out later on.
Even Bruce got some attention this year!

And we had time for some local siteseeing

Before Launch Day arrived
(& our mission this year - to cross to Turkey)

Saturday, December 14, 2013

2012: Hot for the Rock

Repairs & Upgrades Underway: Gibraltar
Great, we've made it in time for the Rugby finals!
Passerelle/Gangplank.   I don’t know if I’ve spelt it correctly but, in effect, it’s a gang plank, walkway that you attach to the bow or stern of the boat, depending on whether your boat is bow on or stern in to a jetty, pontoon, etc.  In Gibraltar everyone had a plank except us so we had to climb over the pulpit and then step out boldly to get onto the (fixed) jetty – not for the faint hearted.  I made a passerelle out of an aluminium ladder with a ply plank bolted to the rungs (plank sourced from a local wheely bin).  At one end, where it lay on the jetty, I bolted a couple of wheels on (to allow for movement from swell, tide, wakes made by various passing traffic).  It was a draw bridge arrangement so that the wheeled end was elevated when not going ashore, which was most of the time.  The boat end of the passerelle was attached, with ropes, at right angles across a sturdy piece of timber that I had bolted (with u bolts) to the base of the pulpit – it had to take the full weight of me with groceries, etc.  The ropes acted as hinges allowing the plank to be raised and lowered quite easily.  The jetty end of the plank also had a bridle attached to it (separated a bit just over head height by a piece of plastic conduit) and the top end of the bridle was attached to the end of the spinnaker halyard.  Pull on the spinnaker halyard and the bridge rises – lower the halyard to let the wheeled end down on to the jetty.   To assist to make lowering and raising easier I attached a jerrycan of water to the bottom end of the halyard so that it became a one handed job  to raise and lower the plank.  It works well and the whole thing cost (ladder, wheels, bolts) about 80 GBP.  Alternatively you can buy very nice folding ones from a chandler for about 350 GBP.
Our new passerelle - works very nicely, thank you
Television and Movies.  In Gibraltar, with time on our hands, again due to my crook wrist, I purchased and installed a television and DVD player.   I also purchased an extendable bracket to mount it on the bulkhead so that I can hold the screen immobile against the wall while sailing but can also extend the screen and rotate it when viewing it from the comfort of our saloon table while at anchor etc.   It was pretty simple really.  Televisions generally only came in 240 volt or 110 volt (which I needed).   There was a 12 volt car model available but it was expensive, and very small – ie the screen was about the same size as an aircraft one that sits on the back of the seat in front of you.  For power I ran the power cable to the nearest 110 volt power point.  The DVD player simply plugs into the TV, however, we never use it.   We have been given a heap of movies on a hard drive which I have installed in a plastic bag that simply hangs on the back of the bulkhead mounting bracket.  All controls are done through the remote, which came with the TV.  I don’t know why I didn’t do this a long time ago.

We found, the hard way, that the screen can swing about in a seaway so we put two SS saddles on either side of the mounting bracket, covered the screen with a towel and use a bungee strap to hold the screen securely against the bulkhead so it can’t leap around anymore.
Why have TV with views like this?
Digital Weather Station.  In early days we purchased and mounted a Plastimo brass barometer and a clock on the bulkhead – very shippy and they look great.  The barometer has been a little disappointing for us, however, since it hardly moves – it only shows major changes in pressure which is obviously better than nothing but still limited when compared with other barometers I have used in the past.    We were impressed by the results demonstrated by someone else who had a portable digital weather station plus we had one at home and, after a quick check of Amazon, a new one – LA CROSSE TECHNOLOGY – battery operated – arrived soon after purchase.  It’s great – very accurate and shows pressure variations constantly, plus a whole lot of other information.  I still like the brass meters on the bulkhead, however!!

Shelves in Port Locker.  In the port quarter guest room, which we have converted to a storage room, there is a hanging locker that wasn’t been used to hang anything, only for storing things.  It was an inefficient use of space.  I installed some shelves and now it holds twice as much as before.  Good idea provided by the Galley Slave (GS) who took one of the shelves to expand her galley holdings.

Solar Vent for Compost Loo.  After several years of being on constantly, our solar vent exhaust fan/motor gave up.  The battery is still okey but I couldn’t source a spare motor.  So, I am now using the little computer exhaust fan that came with the compost loo wired into the boat’s lighting circuit while still venting via the solar vent.  I can unplug when I need to empty the compost bin.

We had no trouble at all filling in time in Gib

Thursday, December 12, 2013

2012: Year 5 - Work in Lagos

Sopromar Boatyard:

This was not a big year for much at all other than some cruising around the local area – lots of real relaxing.  The Captain’s wrist gave major problems when it started to seize up (from old age?) and so not a lot of work was done on the boat while we were in the Sopromar Boatyard (highly recommended), except for the following:
Feathering Propellor.  I had decided some time ago that it would be nice to have a feathering prop as most other cruisers have them but moreso in that they are much better when sailing than a fixed prop.  The Sopromar boatyard fitted it for us and it was there on our arrival for this year’s cruising.  It has worked very well and there is now very little prop walk when reversing.  It’s a German made …..
Shiny, new & it works a treat!
Fair Weather Awning.  While couped up in the Sopromar boatyard waiting for my wrist to right itself there was an opportunity to do some sewing.  Captain and crew decided to make up a light weight awning – easy to put up and take down, something we tended not to do with our much bigger and heavier sunbrella awning, while at the same time keeping the sun off us and the boat.  Light weight shade cloth seemed suitable and, within a few days on ‘the thumper’ , we had our new light awning .  It immediately made life on board much more comfortable as the boat became much cooler inside while also allowing unimpeded movement around the deck. 
Keeping cool under the new awning
Topsides, Coachouse and Cockpit Polish.  I lashed out and paid for a thorough polishing by the yard.  Young blokes got stuck into it and did a great job, better than I could have done in four times the length of time.  They have all the right equipment, expertise and youth to do a great job.  Highly recommended and it was a reasonable rate, plus they also carried out some odd surface repairs to the gelcoat on the topsides. (I’ve just found out, since I’ve been here in 2013, that it’s much cheaper in Turkey!!!)

Bruce/Dinghy Repairs.  Bruce, our erstwhile RIB with 15 hp Yamaha 2-stroke outboard, has been fantastic.  Not surprisingly, after some four years use now, it had developed a few leaks.  The fibreglass floor had some hairline cracks in the gelcoat, which were temporarily repaired in Trinidad some three years previously, but these repairs had started to leak water into the void between the bottom of the boat and the floor.  I determined to fix this permanently so fibreglassed some tape to the areas that needed attention.  I determined these by inserting the air pump into the bung and blowing air into the void – one can quickly identify the leaks by the air leaking out the cracks in the bottom gel coat.  I marked them and then fibreglassed them, sanded them, followed by some sticky paint.  All good and Bruce’s bottom looked patchy but quite presentable.  It certainly hasn’t affected Bruce’s performance at all – planes like a beaut.
At the same time there was also a leak in the tubing, aft portside.  I stuck my finger into it and enlarged it a bit, I guess, but with a view to inserting a piece of repair material/patch  on the inside, as well as a patch on the outside.  For the inside, I deflated the  tube, inserted a  patch (lost it but found it again after digging around inside with my finger) and covered it, and the edges of the hole on the  inside of the tube, with glue using an ice-cream stick.  After a short while (it was a hot day) and when the glue was dryish to touch I pressed the patch and the tube together.   I also partially inflated the tube to assist the inside patch to stick to the inside of the tube ie air pressure forcing the patch against the inside tube.   I then did basically the same with a patch on the outside.  It has never leaked since. 
Bruce was feeing a bit down in the dumps & needed a make-over!
Gas Conversion.  We had been on propane since we purchased the boat but, in Europe, they don’t use it.  Each country has its own gas system, with various bottles and fittings, or there is the ubiquitous ‘camping gas’ that is available all over the Mediterranean.  We went for the camping gas solution, had the appropriate fittings professionally installed, and then purchased four bottles (they’re not very big)  – one each for the stove and the barbecue, plus two spares.  It’s not expensive – about 15 Euro per refill, except for Gibraltar where it was 30 Euro, until I found I could slip over the border to the middle of La Linea where it was half the price and easier to purchase. The guy in Gibraltar you have to catch when he’s there at his warehouse, which is unpredictable.

Another Great Awakening.  While in Lagos I had an opportunity to assist a 70+ gentleman to  take his boat from boatyard launching around to his permanent berth in the next door marina.  I had visions that I might have to do this myself so I was very pleased to be offered this opportunity.  The yacht was about 40’ or so and had power operated  furlers as well as a bow thruster.  He berthed his boat in a strong wind, albeit almost bow on, with familiarity and dash.  I was impressed.  I complimented him on how well he had the boat set up and on his skippering, of course.  He replied, quite simply with  words to the effect, “I love this life and want to keep doing it for as long as I can, hence I’ve set the boat up as best I can to help me manage it”.  Duh, why didn’t I think of that?!!!

We even had time for a few afternoon swims this year