Showing posts with label chandlers. Show all posts
Showing posts with label chandlers. Show all posts

Friday, November 16, 2018

2016: We Continue to Float...

Albania:
Finally, and a whole month later, we were able to throw off mooring lines and move on from Greece.  We made for Sarande, with an increasingly nasty swell kicking in from the west.  Although we’d planned a two day stopover in this pleasant town, our feet rarely touched ground.  In the conditions, poor WJ3 was driven against a large concrete dock, eventually losing a guard rail in the battle.  Our fenders did a sterling job though and only one was lost in the line of duty:

Damaged Fender.  We left the boat briefly whilst dockside in Albania.  When we got back we found one of our fenders had been used on another boat.  Our local agent at the dock (a public one) at Sarande had another boat bouncing against the dock.  Like us, the crew was away for the day.  The agents “borrowed” one of our fenders, returning it at the end of the day.  However it was pretty squashed due to its heavy pounding against the concrete dock all day.   The agents reimbursed us the cost of replacing this fender which was good of them.  The old one’s still usable, to an extent.  Anyway, well managed by our capable and friendly agent, Agim Zholi and his super team.
We had company and pleasant weather for the crossing to Sicily
Sicily:
Now, we had only two months to cover Malta and Italy, plus get WJ3 hauled out and put to bed.  Something had to give and a stopover in Tunisia, perhaps not the safest of options anyway, was struck from our list.  Stops along Italy’s heel and toe were also given a big miss as we made the most of a few days of good weather to cross to Sicily.  Syracuse was delightful.  Initially we anchored until THE plan was modified, yet again, to include a dash for Malta on public transport and a few short excursions locally.  The Syracuse Marina had a vacancy for us, so we felt comfortable leaving WJ3 on her own for a week whilst we escaped to Malta.
We had an excellent vantage point from the marina in Syracuse to watch the world go by
Before I finish with Syracuse, let me comment on Chandlers.  On arrival, we began to understand that life here was somewhat laissez-faire for travel agents and chandlers alike.  There are only two chandlers in Syracuse.  The one closest to the marina did not have all that we wanted.  Another is a bit of a walk out of town.  After locating it, we entered as the door was open and asked staff, who were clearly working behind the counter, about the part we needed.  Language difficulties aside, we were informed that it was their lunchtime and to come back in 45 minutes.  We never did…
  
Boat life went without a hitch after that, except for a struggle in the Aeolian Islands to free our anchor.  It had managed to wrap itself around large rocks and grumpily refused to budge.  Just as we threatened to launch the hookah unit (diving without tanks), it freed up.  Not without wafts of an overheated anchor winch filling the bay.  Lucky on two accounts – not to have burnt out the motor or to have lost the anchor!

The weather remained somewhat challenging during the remainder of our time in Italy.  Add to the mix, heat and crowds on holiday in August.  All these “challenges” added further delays to our tight and ever-varying schedule.  Let’s just say, we arrived in Portugal with enough time to request a visa extension. 
The anchor winch might have been overheating;
at least Vesuvius was not...
Another lesson learned is how much easier it is to prep the boat in a marina rather than a boatyard.  So we moved into Lagos Marina for a couple of weeks of chores then hauled out in Sopromar Boatyard before flying home.  After all the dithering, excitement and stress, we've decided to say “Ciao, baby” to the Med (after a wonderful 6 years) and began to prepare for a dash back across the Atlantic in 2017.  
Heading out of Lagos Marina to Sopromar Boatyard for haulout & home

Sunday, February 21, 2016

2015: In the Yard & Keeping Busy

Preveza, Greece

Welcome to 2015....... Who'd a thought!

In the Yard
(The plan this year was to do a loop of the Adriatic ending back in Preveza.  Given all the work we'd done on WJ3, we figured on an "easy" prep time in the yard...  Of course you'd never believe that just didn't happen.  Our plans were delayed - big time - and we had to cut short the route.  Still, I'm probably not telling boat owners anything new.) 
All's quiet at Aktio
A view from on high
Engine Raw water inlet Hose.  Last year the hose started to leak and I taped it up (with you-beaut very stretchy silicone tape) so it no longer leaked.  Nevertheless, the hose was clearly failing so this year I replaced it, this time with clear stainless steel reinforced hose.  It runs cold water only as it is between the inlet raw water filter/strainer and the raw water engine pump.  This hose was different to the ‘black’ hose I threw out (which was also looking decidedly worse for wear and likely to leak in one or two other spots) but advice was that this clear hose was quite adequate for the job and, besides, you can observe the water in the hose.  So, as soon as it was fitted, would you believe, there was another water leak – water could be observed/felt dripping from the (new) inlet hose near the water pump.  See up-coming post for the result under Siphon Valve Broken.
Sewing.  The dodger, bimini and the dinghy boat cover needed extensive resewing of most seams plus some repairs to rips in the bimini.  Stitching has been the first to go on these coverings, unlike the acrylic which seems to last forever, and the more I repaired the more I found it needed work. 

It’s quite simple really, just pull on the area around a seam and, if the sewing comes apart easily, then it needs to be resewn.  I reckon I did most of the bimini and dodger.   Same for much of the dinghy cover. 

The (summer) awning also needed repairs and I discovered that ‘shade cloth aint shade cloth, Sol’.  Our shade cloth is easily chafed so I will replace it next year even though it’s only a few years old.  Many boats use shade cloth and they are not well supported on the boom etc and flap around madly, unlike our awning which was made to measure and is well secured to stays etc.  Nevertheless, they don’t seem to damage as readily as ours has done.
Baby donkey had grown quite a bit during our absence
Standing Rig Check.  Our insurers, Pantaenius, asked for a rig check as the rigging was now eight years old.  A local rigging company in Preveza duly obliged and the rig was thoroughly inspected over the space of an hour, no problems found and passed by insurance.  The riggers were a couple of local guys, as helpful as could be with all sorts of advice and just thoroughly nice blokes.  Their shop is located at Cleopatra Marina.
Chandlery.  We'd discovered Cleopatra Marina/Boatyard's well stocked chandlery and obliging staff on arrival in 2014.  And made very good use of it in 2015 too!
Another view over Preveza taken whilst servicing the mast
Can you just imagine Cleopatra & Augustus having a big boating battle in here!

Thursday, February 4, 2016

2014: Repairs Underway in Preveza

Ionian, Greece: 2014

Preveza Marina - getting ready for haul out
Companionway Step.  I managed to break the side lip on the bottom step of my companionway ladder while standing on it; replaced it with the top step and in turn had that replaced with a flat piece of timber (bamboo actually – a cutting board).  The original steps curl up at the edges and so they are particularly important on the bottom step as there is nothing else to stop one’s foot sliding sideways.  The other five above all have stainless railing to support your foot and prevent it sliding.  The companionway steps are one of our most loved parts of this boat ie a gentle rise, rather than a steep one like many other boats, and at rest it is quite easy/safe to carry a drink in each hand while ascending, without spilling anything.  I actually now prefer my new top step/cutting board as it is bigger than the original.  It’s fine at sea too.
Light Connections.  Located and repaired electric connections (that had come loose over time) for a bunch of cabin lights over the galley and in the store room.
 
Floating through the Corinth Canal
Leaking Fresh Water Tank.   For several seasons I had always wondered as to why there was water pumped from the bilge whenever we refilled the water tanks.  It only occurred a few of times then it would stop altogether.  To cut a long story short this year I heard a strange sound while refilling the water tanks and lifted some of the flooring access plates.  I could hear a hissing gurgling sound and sure enough one of the (five) plastic water tanks had a small slit at its top.  

I could feel it but not see it as most of the water tanks are hidden from view under furniture.  As it is, I can’t get to it to repair it and would have to lift some flooring and may be some of the galley furniture (which is not removable as far as I can see) to be able to do so.  I believe that you can repair these tanks with plastic welding but you need to be able to get to the damaged part relatively easily.  It looks easy on You Tube.  So, I’ve had to leave it and I use this tank first off whenever I refill tanks.  Fortunately all tanks can be isolated from each other using the ball valves for each tank located near the fresh water pump.

Starter Battery Died.  At the island of Meganissi, on the Ionian Sea and not very far south of Preveza, the starter battery died.  Working fine one day, not the next.  Fortunately, Meganissi was only a 20 minute fast dinghy hike in Bruce to a decent chandlery on Lefkadha and I was back on the boat in an hour and a half with a brand new battery.  No further problems.  I did try to use jumper leads from the storage batteries to the starter battery but it was not enough to turn the engine over.  I’m sure there must be another solution and will let you know when I find it out.  What if one were far away from civilization and the starter battery died?
At the marina, we had time for side trips
Maintaining Stainless Steel.  This year I made a startling discovery.  To keep the stainless clean and shiny, with minimum rust marks, clean it with fresh water.  It gets very salt encrusted as you cruise around and builds up rust stains but, rather than leave it until the end of the season or on visits to marinas where there is plenty of fresh water to hose them off, just wipe them with a wet rag of fresh water every now and again.  We carry four jerry cans of spare fresh water but you really don’t need to use much anyway.  A bucket half full will easily cover all the (considerable) stainless railing around the boat.  Anyway, just remarkable, no need for polishing all the time (which I rarely do although I always feel guilty for not doing it).  I suppose everyone else out there knows this simple technique but I had never read about it.  I just discovered it by accident. 

Generator Raw Water Develops Galloping Diarrhoea.   About a week or so before we reached our port of storage at the end of the season (Preveza), the generator shat itself and the drip tray was full of dirty brown water.  The raw water pump bearing had died again (last time seven years ago) and so it was leaking lots of water from the engine cooling system.  No other damage resulted as water was still being circulated around the engine but the generator could no longer be used.  We had it repaired once we were on the hard by a very helpful German mechanic, Stefan, arranged for by the yard – Aktio Marina.  This was to be the beginning of a growing but unwelcome relationship - only because of too many boat bits needing TLC!  Our relationship continued on in 2015.  The Other Woman is loving the attention....

2014 - an Interesting year for repairs!
Aktio Boatyard, Preveza - Haul Out

Saturday, January 30, 2016

2014: Repairs Underway in Poros

Poros, Greece

Raw water inlet hose on engine started to leak, just a few drops every minute.  I hate water inside the boat at the best of times so, having found the leak by feel, I bound it with some very stretchy tape that I carry on board which is designed for just this sort of eventuality.  It stretches about four to five times (I’m guessing) its original size and you wrap it around whatever you want – it sticks to itself if you don’t ruin the sticky part with grubby fingers.  I also wrapped some duct tape over that and it stopped leaking for the rest of the season. 
We had a great trip north up the Turkish coast from Marmaris, with some
isolated anchorages, clear waters perfect for snorkelling and amazing
ruins (like Pergamum) to explore along the way.  Highly recommended!
Continuous Furling Line for the Mainsail.  It needed replacement I thought as it was looking a bit hows-your-father.  Tried at the Marmaris marina boatyard sailmaker but, by now, we weren’t talking to each other so no luck there.  Tried other contacts but, although promising to get back to me, didn’t.  At this stage we were on anchor just off the Marmaris boatyard and, I have to admit, I sensed  a lack of enthusiasm by tradies to work on boats when at anchor (perhaps they worry about getting paid before boaties sail away in the night).  So, we gave up trying and departed Marmaris still with the original line and it lasted fine (for quite some weeks) until reaching the west coast of Greece and about to enter Poros, with a good wind blowing.  I started to furl the mainsail, probably under a fair bit of pressure but not as much as we’ve experienced before, then, bang, the line snapped.   I simply furled the main using a winch handle on the winch on the mast. 

In Poros there is a popular chandlery and the staff there were very helpful, selling me some new line and also arranging for someone to come out the next day to do the splice.  I might add here that the furling line is braided, this splice has to be pretty much exactly the same diameter as the line is so it will easily run through a bunch of blocks and winches, while at the same time be almost as strong as the line itself. 


The one that got away!
We had arranged that I would meet the ‘splicer’ the next morning and take him to and from the boat, which was on anchor.  The chandlery man very kindly came along to the pickup point to make introductions and off we went.  The ‘splicer’ was a local, in his late seventies, couldn’t speak English and had a gammy leg (at least one of them).  On arrival at Windjammer he almost fell into the water as he endeavoured to cross from the dinghy to the boat at the stern (it doesn’t get friendlier than this let me tell you) and all crew had to come to the rescue – it was a near run thing.  

Unperturbed he set about his business and nothing I could say would influence him as he went about his task.  Anyway, after an hour of honest toil I had a splice that did indeed slide through all the sheaves and winches but with about 5% strength.  We all agreed that it was a fine effort and I duly returned him to shore, paid him the agreed amount plus a healthy tip, and we parted on very good terms.
We had spectacular scenery through Greece too. 
This is Cape Sounion.
I now did what I wanted to do in the first place – do it myself.  I had watched YouTube for ‘how to’ instructions several times and also had written instructions to refer to.  It was a fairly easy fix by following the instructions.  The hardest bit was the three splices you have to stitch in place to hold the joins neatly and securely together – it took me two goes to do a neat job ie making sure the rope’s diameter was not increased so it easily moved through blocks and jammers.  Very satisfying effort in the end!  Why didn’t I do it myself in the first place?  Well, I thought that for such an important repair I would watch an expert do it first, then do it myself next time.  Oh well, he was a lovely old bloke and it was one of those magical experiences you only get when boating.  We also think he’s dined out a few times with his mates on the strength of his “near death” experience on our sailboat.   In 2015, when the rig was checked by professional riggers for insurance, they noted that the furling line is too stretchy and too large so I may replace it next year.
Outboard Doesn’t Go Fast When Powered Up.  In Poros, one night we headed into shore for dinner and since we were anchored a fair distance from the town docks we sped into town at best speed on the plane.   Our 15hp RIB dinghy ‘Bruce’ can tow a skier.  On the way back to the boat we motored along fine but when trying to get onto the plane the engine would rev madly but not have the "umph" to get the boat going on to the plane.   We could still use the dinghy but only at slow speeds.  I checked the prop and it seemed to be locked in ok and couldn’t find any fault with the gear box.  When we eventually got to Preveza the first time to check out the boatyard, we gave the motor to the mechanic arranged by the Aktio Marina.  The mechanic took the outboard away and next day it was back with a new propeller fitted.  Seems that the old prop had worn its gearing so badly that it slipped on the gear shaft at high revs.  So, there you go, I certainly didn’t think of that.
Poros is the quintessential Greek island village