Showing posts with label 2010. Show all posts
Showing posts with label 2010. Show all posts

Saturday, August 3, 2013

Bah Humbug!

Pylos, Greece: 2013

(This post has been previously published on our WJ3 site.  As it's been a while since the Cap'n did some serious homework on his "tricking up" of the other woman, this will have to suffice - for a little while longer.  The First Mate is nagging, seriously...)

Sitting on anchor in Pylos, our first Greek port of call after a whirlwind tour through the Med, I’m tempted to hurl a sharp missive to three soothsayers, visitors to the Deltaville Boatyard (Virginia, USA) in, 2010.

Let me set the scene.  There we were at the far end of the boat yard, up on spindly legs getting ready to splash.  Afternoon visitors to the yard were not uncommon and three stopped by for a chat.  Actually, they stopped to highlight Hunter’s foibles, especially as they saw it; "only built to suit coastal conditions," they said.  Like Witches of Endor, they stirred the pot, making even more outrageous dispersions against Hunter, ignoring our rebuttal. 

Finally, they left.  “Rude,” we said in unison.  Had they bothered to listen, WJ3 had already done two laps of the Caribbean Islands, sailed to distant Turks Caicos and managed a tour through remoter Bahamas Islands.  All this before settling on the scenic route to Chesapeake Bay (via the Atlantic ICW). We were on our way to explore Maine.  Hardly dock candy, even then!

So, as we sit on anchor in Greece, about to island hop to Turkey in 2013, we say to them, bah humbug!  WJ3 has 12598 nautical miles tucked under her belt since we started sailing her in 2008.  She has now crossed the Atlantic, comfortably and safely, and this year crossed the Mediterranean.  What a gal!  And not bad for an allegedly “unseaworthy” Hunter!

Now I’m not advocating setting out to sea in a pair of floating shoes (it’s been done before) but boat builders must comply with certain standards.  We’ve also added modifications to make WJ3 more comfortable (eg. a storm trysail) and to improve her safety (eg a sea anchor).  If in doubt, have your craft surveyed and read how others have set up for ocean passages.  We’ve seen expensive Beneteaus kept in marinas for Olympic triangle racing and home-made brutes only a mother could love, floating in far-flung, out of the way places.  

Doubting Thomas’s can check our map tracker here.)
Sharing Keci Buku in Turkey with some real bunnies...

Tuesday, June 21, 2011

Moving House

Documenting out Trip: ISP Hazards 2

As one of our calamity prone PM’s said, “life wasn’t meant to be easy”!  There was a lot of research needed to find an appropriate solution.  Who was the most appropriate blog provider for us given our gypsy circumstances.  Transferring WJ3’s 2008-2010 posts, all 145 of them to date, could not be done.  Way too big, apparently!  So, with heavy heart, GS began in early 2012, a slow cut and paste process, reducing the number of posts on Typepad, until its size was more acceptable to export. 

The big day to move came and finally, after several failed attempts, the export to Blogger actually stuck.  Apparently there is some difference in “language” and not being a geek – which is pretty obvious given the above – made the process one of trial and error.  Not wanting to let go too easily, Typepad actually retains your photos on its site.  This means that if you suddenly delete Typepad, your blog photos – even the ones imported to Blogger – disappear into the ether too.  One other problem with the export was that Blogger doesn’t take to tables very well.  WJ3’s posts were doubling as our cruising log and some 75 posts contained tables…… 
Stop the boat, I've just found my new house!  (Oh, I wish!!)
Sharing a Room
All the issues with importing to Typepad, then Blogger, left a mountain of work.  To make life a little easier, we broke them into steps:
  • Step 1:  Number posts.  Easy to use the saved Word documents as a ready reference.
  • Step 2:  Remove duplicate posts (and note missing ones!) from Blogger’s post list.
  • Step 3:  Remove tables, replacing with information presented in another, more suitable (to Blogger) format.  (This took hours, and we made changes to the Word documents first before removing table detail on-line.  Tables throw out Bloggers formatting.)
  • Step 4:  Remove and replace photos, editing on-line.  I have the photos stored on an external HDD so that the computer is not overburdened. 
  • Step 5:  Check each and every post for typos, spelling errors, tag omissions, links gone haywire and any other formatting problems from the import.  Don’t forget to insert a new visitor counter (if you want one).
  • Step 6:  Remove Typepad, graciously acknowledging its part in keeping your posts alive until they found a new home.  (There is nothing wrong with either Wordpress or Typepad – they just didn’t suit our style of blogging.  Vox had been so easy to use!  It had set a high standard; we thought only Blogger came close.  We also like the way Google keep making improvements to its functionality too.)
Quirky Maine
Nice Wallpaper!
Of course, we are still tinkering at Step 3 given our “boating” circumstances and access (mostly not) to internet.  GS continues to suffer horribly every time the service falls over in our current marina. 

Lessons:
  • It will take longer than you think!
  • Choose your blog provider carefully but don’t be afraid to move if it doesn’t suit you. 
  • Decide how important it is to keep your old posts.  Perhaps they might find a better home in a coffee table book using a program like Blurb. 
  • Always keep a backup of every post you make if you do want to save them.  Then learn how to file things away so they can be found later if needed.  Keep paper if you don’t want to use a computer. For anyone nautically inclined, we also keep a proper “log” on a spreadsheet (or indeed, even in a Log Book!).  It all helps when you need to fill in gaps.
  • Always back-up your computer. 
  • And finally, never waste a good crisis………
To keep a blog of our on water voyages in WJ3 was a fantastic idea
& well worth any "little" problems... 

Monday, June 20, 2011

Crashing Worlds

Documenting our Trip: ISP Hazards

Panic set in when Vox announced it was closing down (in Sep, 2010).  Completely shutting shop!  And all its blogs of wisdom would be lost – including ours if we did not act.  We had a month to export or were doomed to perish.  A month isn’t so bad if you’ve got unlimited internet access, all your old photos on hand and several slaves to help you achieve the impossible.  We were on a boat and only in town for a few days.  And we had been posting since 2008.  Our only immediate internet access was Starbucks – a 20 minute bike ride away in downtown Staten Island. 

Vox offered the opportunity to export to Wordpress or Typepad.  GS chose both.  Then on BW’s words of wisdom, proceeded to copy and paste every post into a Word document.  Just to be sure!  Safely locked away, the decision then (to settle on the best blog platform) could be left for “afterwards”.  Starbucks were amazingly patient.  For the price of a few too many coffees, WJ3’s blog world was saved. 

Do you think they'll have an internet connection here?
New Premises

Now, Vox was just so easy to use!  They had even made uploading photos from Picasa a dream too.  After much fiddle-faddling, Wordpress was the first for the executioner’s sword.  The import had gone well, but the software’s inner workings were not as agile nor as artistic for me.  Typepad was easier to use although the free version we were offered had some limitations – mainly size.  Also, the transfer had not gone well and most of the posts needed to be cleaned up.  Font styles and colours changed, photos disappeared or were smaller or larger than before.  This was a job for (much) later on….

In the meantime, we still wanted to record our boating adventures.  So at the Captain’s suggestion, GS took a look at Blogger.  Having read some e-reviews that rated it less desirable than others (only minimally), she was not too sure.  However, a few friends were happily blogging on it, so we trialled a blogspot. 

There was no looking back.  Blogger was easy to use, almost intuitive and an eminently  suitable replacement for Vox.  So began WJ3’s fresh, new start; a record of her sailing journeys, 2011 onwards (link here).  Meanwhile, Typepad sat at home with the posts from cruising seasons 2008 to 2010  - waiting, waiting for a new home…sigh!
We were able to relax & enjoy the delights of Maine after all that hard work
(Ed. And are still happily using it today at the end of 2022!)

Sunday, June 19, 2011

No Dock Candy Here

Sailing Magazine’s John Kretschmer reviewed Hunter 460’s in his article for “Used Boat Notebook” Nov/Dec 2010 issue (p34).  The 460 is described as a capable and affordable cruiser that is holding its resale value despite the market downturn (due to the GFC).  We noted his comment about the carbon fibre rudder stock and were in full agreement – we replaced ours with stainless in early BVI days.
On Anchor in Baltimore's Canton (JGP Photo)
I certainly agree that the Hunter Owner’s web site is an excellent and friendly resource.  I used it quite a lot in our early days (pre-owner) to find out if the 460 was the one for us.  We like to gunkhole in quiet anchorages rather than pull up to marinas, and were concerned the 460 was more a floating show pony.  Our experiences have proved otherwise as we’ve since cruised the Caribbean to Trinidad (2008),  up to Chesapeake via the Bahamas and the ICW in 2009 and Maine, New England coasts in 2010.  Hunter themselves have been very helpful too, as since purchase, I’ve negotiated my way around numerous repairs and upgrades.  I was sorry to have missed an opportunity to visit their factory on my way up the ICW though.

The features we really like, informed by 3 years of ownership, are the swim-step and its shower, and the hatches that open wide to let in balmy tropical breezes.  The accommodations are really easy to live in and though seem somewhat voluminous at sea, we rarely move forward of the saloon when underway.  The galley is very secure for the Slave at sea, the nav station easy to slide into and the amidships head well positioned for any action, even in rough conditions.  WJ3 has been rigged for shorthanded sailing too (as Soul Mate) with all lines coming back into the cockpit. Of course there are a few limitations to the Hunter 460 but I think I’ve covered them in previous posts.  

So, it was good to read positive things about the 460 and for us to compare the analysis with our own experiences.  Well done Sailing Magazine because we agree.  We’ve found our Hunter 460 to be an easy live-aboard, safe and comfortable cruiser.  On the bluewater or slumming up the ICW, WJ3’s the gal for us!

(For another & older review (2000) we found this one on line from Sea Magazine.)

Saturday, June 18, 2011

Winterising Decisions

Grand Designs: 2010

We tossed and turned about our 2010 winterising location and did quite some research into leaving WJ3 in Nova Scotia.  This would have meant a more relaxed, thorough trip north from Chesapeake Bay to Maine and Nova Scotia.  We had even hoped to make Prince Edward Island too.  However, we ended up returning to Deltaville largely due to the commitment of winterising that far north.  This saved us the hassle of finding a wooden cradle, taking out the mast, covering WJ3 in plastic shrink wrap (friend Paula reckons they look like oversized Steggles frozen chickens!) and/or leaving her in heated accommodation.  We would then have further problems of sailing through ice on our way out to the Azores. These cold weather solutions did not appeal to us at all and our concerns were well-substantiated when a friend (who loves cold water sailing) did leave his boat with associated costs to the tune of some $17000. Mind, that did include some work done to the mast whist it was out.

Chilly on the Chesapeake in late October
Back in Deltaville, we allowed a good ten days to get those chores done before leaving WJ3 to Virginian snows and icy blasts – and as we were later to discover some rather too close tornadoes. 

After last year’s mould problem, we still washed the hard areas down with a vinegar/water solution and left baking powder in the fridges to keep them smelling sweet.  GS put a generous quantity of closet camels throughout the boat and sprinkled lockers liberally with moth balls.  I consulted Herd’s Hardware (a great local repository of gadgets, knowledge and advice) as to a better solution to our teak oil problems.  Finally I set up one dorade vent just behind the mast (in a purpose built fitting) and left the small solar fan that vents the compost loo (disconnected) to extract stale air from the boat. Let’s see if that works!

Friday, June 17, 2011

Lessons Learnt from Earl

Hiding from Hurricane Earl: 2010  

Having spent the previous two years cruising a bit quicker than we would have liked because we were always later than planned in getting out of the hurricane zones.  (Ed. Ahem! Largely due to spending a great amount of time undertaking repairs or upgrades.)  First year southwards to Trinidad, then 2009 north to Deltaville.  So we were a bit surprised when, on arriving at South West Harbour, Mt Desert Island, (way up north in MAINE, next to Canada would you believe) we found out a hurricane was on its way.

And due to arrive in the next couple of days. Bloody hell! 

We tried to get into North East Harbour but it was already full of local sailors who were obviously much quicker than us to respond to hurricane warnings.  To be fair though we had been advised that South West Harbour was probably going to be okay but, when a local lobster fisherman and owner of a lobster coop advised that South West Harbour was not the place to be, we followed his advice and hot-footed it to Somes Harbour, at the northern end of Somes Sound.  Fortunately, we were one of the first to arrive and found a good spot to anchor and, over the next day or so, watched as quite a few sailboats joined us or had a look but then departed after probably deciding it was a bit crowded. 

For the next day or so we prepared by getting frequent weather reports, putting out two anchors in tandem (on 200 feet of chain) and digging them in seriously, we took down our sails, and generally stowed things in expectation of a boisterous hurricane.  As it turned out and as the hurricane came closer, while at the same time losing power, we did not need to take down our canvas or fill up the dinghy with water (as originally planned).  On the night of the big blow the wooded hills surrounding Somes Harbour certainly felt Earl’s wrath but, down on the water, our anemometer registered its highest reading of only 34 knots.  A bit of an anti-climax as things turned out but I’m sure it was better than a real hurricane blow.

Fog creeps in ahead of Earl:  Hiding on anchor in Somes Harbor

Thursday, June 16, 2011

2010: Annapolis & The Solomons

Work Completed Underway: Part 2

Anchor Riding Sail.
  We made it to the annual Annapolis boat show – the biggest in the world we’re told.  We visited for one whole day and still missed some parts of it. One of our purchases was an anchor riding sail that impressed us as a logical solution to WJ3’s tendency to dance around a bit while on anchor in a fresh breeze.  You hoist this three dimensional triangular sail with a topping lift and attach it to the end of your boom and with  guys out to the sides – it steadies the boat holding it into the breeze and so, much less sailing around on anchor or a mooring. 
Hi Vis with the new Anchor Riding Sail (JGP Photo)
Fuel Again.  Having said we had no further fuel problems really meant that I knew how to deal with it when it raised its ugly head again off Oxford.  We were full of the joys of the world having had a good season up north, made it safely back to the Chesapeake, and experienced the delights of the Annapolis Boat Show, so the last thing we expected was to have fuel problems again.  In the little village of Oxford, we dragged on anchor during the night (in fairly stiff winds and poor holding) and decided to leave in the dark.  In the worst possible place at the worst possible time the engine stopped.  It could only have been fuel.  I hadn’t refuelled for some time and dregs were an issue now.  We turned back (under sail) and anchored in the river until daylight and a fuel dock opened.  Exciting stuff!

Whisker Pole.  That same day, once we beat our way out of the choppy Choptank, we set a fair pace down to the Solomons with the wind behind us so I poled out sail.  Much to my annoyance the cheap, nasty (metal look-alike) fittings on the whisker pole almost disintegrated.  I eventually replaced them with much more substantial Ronstan fittings purchased in Australia.
WJ3 at anchor in Back Creek, Solomons Island
Welding in the Solomons.  On top of the steering pedestal in the cockpit there is a semi-circular stainless steel grab rail; it’s always been there (most sailboats with wheel steering have them) and you tend to take it for granted – until it breaks and you can’t use it, which is what happened to us.  The weld at the base of one of the legs had failed so it was not safe to use.  Of course, we arrived back in the Solomons on a weekend so I wasn’t expecting to have a lot of success in getting it fixed.

However, I visited the local West Marine and made some enquiries.  There was a guy standing at the counter who just happened to know of a welder nearby, had used him on his own boat a lot, and, best of all, my new-found best friend offered to drive me there, as the welder lived a few miles away.  To cut a long story short, the next day I had a vastly stronger grab rail reattached to the steering pedestal – it cost $200 but the fittings that had been welded into both bases will outlast all my other stainless.  The welder happened to work from home in a big barn-like shed that was so well equipped that my eyes watered with envy.  He also happened to be a great bloke, believed that quality was much more important than cheap quantity, and very obliging by doing it quickly. 

My new best friend turned out to be the same guy, with his wife, that the First Mate and I had shared a friendly conversation with at the local Holiday Inn bar where we stopped for refreshments while on our way north a few months earlier.  Our conversation had to start when we noticed that his wife had ordered a bucket of cocktails of various flavours and alcohol – it was huge.  Anyway, she enjoyed it, we enjoyed the ensuing discussion about it and, lo and behold, the husband just happened to be at the West Marine counter when I showed up with my busted grab rail.  Another tale of a small world and meeting some of the nicest people while cruising.

Wednesday, June 15, 2011

2010: Great Kills Harbor

Work Completed Underway: Part 1

Our trip to Maine, although delayed by my work schedule, went ahead as planned – more or less.  Well, less actually because we didn’t make Nova Scotia.  As Hurricane Earl (Sep 10) followed us up the coast and sideswiped Nova Scotia, we were pleased to have missed the worst of it in our hideout in Somes Harbor, Mt Desert Island.


Having spent some 10 weeks doing repairs and upgrades doesn’t necessarily mean that we escaped the joys of repairs underway.  Gunk in the fuel tank was our most dramatic problem, given that we were without a functioning engine and had to anchor under “sail power” twice during the season; and always when conditions were at their worst….
R2D2 our new oil filter that seems to have worked miracles...
Diesel Fuel System.  I always put fuel additive into the fuel tank whenever I refill but it doesn’t seem to have fixed a perennial problem of gunk in the fuel, as found in the primary filter from time to time.  As each season goes by, and the fuel is turned over as we motor a lot (on Chesapeake Bay, ICW, etc), it generally cleans up without anything more than routine checks of the primary filter to clear any build up of gunk, and occasional filter changes.  This year it let us down offshore near Atlantic City, and after we’d motored quite a few miles (up the Chesapeake Bay, thru the Chesapeake and Delaware Canal, then down Delaware Bay), we had to sail along the coast and then into Sandy Hook to anchor – a sobering and thrilling event, especially for the First Mate who had to helm while I worked the sails. 

So I decided to upgrade the primary fuel filter for a bigger and better one, thinking that it would solve our woes – a Racor M500.  It didn’t come with the right fuel line fittings for WJ3 (3/8’’ elbows) so the guys that ably and charitably assisted me (see the story on our blog) came up with a combination of fittings to get by with – hence R2D2 was born.  I put it all together and fired up the Yanmar, only to have it cough and die a few minutes later.  Oh dear, only one course left to me, as advised to me as a sort of last thought as I left the dock with R2D2 in hand, and that was, if I had further problems with fuel, undo the fuel fitting on top of the tank and check for any blockage.  With a desperate  and heavy pit in my stomach I followed the instructions – a pretty easy task as it turned out, just undo a few screws, take off the hose, and, voila, a very blocked ball valve.  Aaaahhhhh, so that’s what’s been causing all the problems.  I shoved some wire thru it, blew into it and got out all the gunk.  No problems again for the rest of the season.  What a !@#$% relief!!

Time to relax & think of nice things_ Great Kills Harbour

Monday, June 13, 2011

2010: More Work in Deltaville

Deltaville Boatyard: Part 2

Outboard Hoist near Davits
Sail Wardrobe.  Plans were being hatched in 2009 for a storm trysail and cruising spinnaker when finances allow and these were added in 2010.  I ordered, via the internet and while in Australia, a cruising spinnaker and a storm trysail from the Rolly Tasker agent in the US, which were waiting for us on our arrival at the boatyard in Deltaville.  Couldn’t have been much easier!  I also did the same for a series drogue from Sailrite.

Outboard Hoist.  In Deltaville there is a shop - Nauti Nell’s - that, among other nautical nick-knacks, sells boat items on consignment.  We love visiting this place and, shortly after returning in 2010, I found an outboard hoist at a bargain price ie half new but the item was indeed new.  So, we now have a heavy duty stainless lifting hoist on the back of the boat, which has made lifting the heavy 15hp outboard a relative breeze.

Washdown Pump and Hose
Washdown Pump.  My Crew (anchor woman) called for a washdown pump (salt water) to be provided mainly for those occasions when the anchor is pulled up and covered in thick oozy clinging mud, which has been most of the trip since we entered the ICW at West Palm Beach in 2009.  When I installed the compost toilet up forward it freed up the toilet intake raw water pipe and so I installed a washdown pump in line, put in a deck fitting in the deck, and plumbed everything.  Electric wiring was provided by the, no-longer-needed, wiring for the forward holding tank pump.  So, a relatively simple task (once I had worked it all out) has made up-anchoring almost a pleasure for the First Mate.  Cost - about $200 by doing it myself.  I bought the long hose kit (50’) so that I could easily get to anywhere on the boat if needs be, and especially the stern when, one day, we catch a big fish and need to wash away the mess after cleaning it.  One has to have a dream!

Radar.  I purchased and installed a Furuno radar, attaching the antenna just above the lower spreaders. This was another internet purchase.  I must say that the Boat Yard were very good at taking deliveries for those of us who DIY.  I set the radar screen/panel just above the chart table and, yes, some would say that it should be at the helm in the cockpit but I prefer my navigation electronics at the chart table.
The new radar (WJ3 in the Deltaville Marina)
Freshwater Plumbing.  The pressure freshwater system uses a fairly common PVC system (available in most hardware stores in the US) whereby hoses are routed and joined using a range of press-on-and-screw fittings.  It works quite well but the fittings do tend to crack – perhaps it’s just old age or they might be too tight perhaps.  So, I have had to replace a number of them as they leak when they crack.  So, I monitor the freshwater system fairly regularly and listen for any intermittent noises from the pump, which might indicate that there is a leak somewhere. I also carry a range of spares and check said fittings to ensure they do not work loose with vibration of the pipes over time.

Sunday, June 12, 2011

2010: Year 3 - Work in Deltaville

Deltaville Boatyard: Part 1

Back in the USA.  Deltaville is beginning to feel like home!
 
Winterising in 2009 worked effectively but we spent a good few days cleaning mould off the timber work. We had used a light furniture oil to treat it before we left.  The hard surfaces we treated with a vinegar solution and that seemed to work very well except for the shower (because we left the door closed).  We needed to consider a ventilation system before leaving WJ3 in the boatyard at the end of the 2010 cruising season.

Full frosty moon in the boatyard
‘Essential’ Upgrades and Repairs.  I decided to spend time in the Deltaville boatyard before splashing to get all those “essential” upgrades and repairs attended to.  In all we became a regular part of the Deltaville community in our 6 weeks up on the hard and 4 weeks in the Marina.  We concluded that life was a lot easier in the water (and nearer to the pool, laundry and bathhouse!).  However, this delayed our departure for Maine & New England coasts until well into the season and we had to strike Nova Scotia off our list all together.  We both agreed though that the time spent doing maintenance and upgrades was well worth it and the First Mate even found a local quilting group to visit. This is what we did:

Toilets and Being Green.  The macerator pumps needed to be replaced as the original ones were corroded and not working, so we just swapped one for one, easy.  I had an impromptu test of one of them when my Crew mistakenly filled a holding tank with fresh water, rather than the nearby fresh water tank.  Oh well! 

  
Oh look.  An outside dunny!
We actually took this one step further and took out a complete head system (in the forward cabin) and replaced it with an eco composting toilet aka “turdis”.  Simple, easy to use (we hope) and so far the only problem we’ve heard is that peat moss – the necessary composting agent – is hard to find in some places.  However, peat moss comes in huge bags so that we now have a couple of tubs full in the storeroom – probably 10 years worth at our rate.  

This loo, a Natures Head, complies with strict US regulations regarding discharge but best of all (so the cranky crew says) it can be used whilst we are up on the hard.  The rear head, easiest to use whilst at sea, remains a pump out or holding tank choice depending on where we are. 

The compost toilet has turned out to be a most welcome item – next to no smells as there is a small (computer type) fan that constantly circulates the air inside the toilet to outside the cabin, via a tube system from the toilet to a deck fitting.  The fan can be wired into the boat’s electric system or you can use, as we do, a solar powered vent, which runs all day in sunlight and, at night, runs off a recharged rechargeable battery.

Friday, June 10, 2011

Keeping Home Fires Burning

Back Home in OZ: 2009

Repairing Electronics in Australia.
  I sent the Raymarine stuff to the agent in Sydney and they repaired the wind instrument (AUD 140) but they could not repair the fixed GPS (new one USD 300) so I had to replace it completely, although the original wiring was okay to be used.  The Simrad repair agent in New Zealand tested and carried out a small repair to the autopilot which cost nothing – nice guys.  In all, the experience was a good one – no fuss, no hassle and what could be retrieved was.  It provided me with a good starting point for the messy business of fixing the lightning damages.



Cooked as a goog
EPIRB.  A personal locator beacon (PLB) came with the purchase of the boat and, after some mucking around, we managed to convince the US authorities to register it in the US, even with our home address and contact details in Australia.  The Australian Authorities didn’t want to know us as the PLB has a code that is country specific ie a US number.  I understand that one can have the number changed somehow.  We have also purchased an EPIRB in Australia so that is registered in Australia but with the same contact details that we have for the PLB.  We felt we were on a hamster wheel for a while - going fast but getting nowhere!

Purchasing Stuff via the Internet.  We have ordered lots of stuff over the internet, in the US especially.  This makes it very easy to find and purchase what you want.  Delivery can be as quick as you care to pay for it but $extra can get you lots of things within one week from anywhere in the US eg electronics delivered right to your marina door.   It is time consuming though and part of that is because, as a foreigner, you need to be able to use your (in our case) home based credit card.  Many companies won’t allow this; you have to have a US billing address.  So, I always call the company (using Skype) to confirm that they can take foreign cards while allowing for the goods to be delivered to the (US) boatyard.  I also check that they have the item in stock as, very often they won’t tell you (on their website) that the item is in fact not in their stock at that time.  We learnt this lesson waiting about three weeks for a delivery (rather than the usual one).  This can have the potential to affect your departure plans and weather windows wait for no man – don’t we know it!

Thursday, March 24, 2011

Getting Work Done Overseas (And Home Perhaps)

Getting to dream locations like this in St Croix
It isn’t easy and in fact it can be downright difficult to almost impossible at times to get work done, especially in a foreign country.  I’m sure, like me, you have read stories of boat owners giving up on getting work done in a particular locations.  Alternatively, the work has been shoddy, promises made but not kept, etc.  Herewith some lessons I learnt, sometimes the hard way.  This sort of project is not for the feint hearted and if you intend to do something similar then I recommend following the three ‘P’s’ as someone kindly passed on to me in BVI - Use Patience, Politeness, and Perseverance - Always.

Obtaining Quotes.  By all means try to follow this most basic of rules.  In BVI it was impossible because (when I was there in May/Jun08)  there were large charter fleets which get priority for work, for obvious reasons, as do local boat owners and, of course, super yachts.  There was a great demand for available tradesmen.  I found just getting work done was a major achievement so I forgot all about trying to get quotes.  Of course, I became more adept at judging who to use and who not to (more on this later).   In Trinidad you could get quotes for work to be done and make the appropriate selection – note that there aren’t any charter fleets there to compete against and the industry is geared towards the cruising sailor.  Even in the USA it has been difficult to get a straight quote.

Cheap Labour.  It might exist but I never found it unless you took on a local worker, after hours.  Some of them are quite good, some are less than good.  How do you know the difference – ask around and get firm opinions from fellow cruisers who you know personally that have had satisfactory work done for them.  Get several opinions if you can, it might save you a lot of time, money and heartache later on – a good investment early on.  I often found the more expensive tradesman was cheaper in the long run – a $70 per hour guy who takes one hour to do what you want rather than two hours by the $50 per hour guy.  I also found some tradies were happy to explain to you what they were doing and so you were receiving ‘free’ tuition at the same time – this was invaluable.  You are often charged high rates for time worked but much of the work might be undertaken by semi-skilled labour contracted out.  Labour is not cheap in the Caribbean, anywhere that I went.  The hourly rate for labour in the BVI was around $50-70 (with some notable exceptions) and it was very similar in Trinidad. 
Can lead to unfortunate incidents like this
(That's not us stuck on a coral reef in St Croix!)
Supervision.  I prefer to be present when work is undertaken as workers are often unsupervised.  There are prolific stories of workers simply not doing anything when found by the owners yet, at the same time, owners are being charged for their time.  I had the rudder replaced by a local contractor in BVI and the guy didn’t appear to fully know what he was doing; his philosophy seemed “hit the quadrant hard enough with a hammer and it should fix the problem”.  The casting was broken, had to be welded (twice) and I eventually complained to his boss to come and supervise the work.  I also had to suggest that they place shims around the top of the rudder shaft as the new stainless shaft was slightly smaller than the previous shaft that held the rudder quadrant.  I shouldn’t have had to do that.

Keep Your Yard Informed.  Boatyards generally want their customers to go away happy and prepared to recommend them to other boat owners.  Many marinas have their ‘favourites’ (contractors) that they recommend to you for work to be carried out – they will be those based at the yard or have satisfied some other criteria that allows them to be contracted while still being based elsewhere.   Yards don’t want to employ/recommend contractors that are not giving good service.  This was very entrenched at Power Boats in Trinidad and part of the culture.  It was also very helpful when I was at Nanny Cay Marina in BVI – on one occasion when I was not happy I raised a concern with the yard manager there and he was very supportive and helpful ie he ‘discussed’ the work being done by the contractor to sort out my problems.  Nanny Cay had just employed a full time manager when I was there to look after their customers’ interests. They have a similar system in place at Power Boats.  I wished I had known how important this was when I first started work on my boat.

Check the Paperwork.  Workers will often exaggerate their time on the job and you will pay for it, because they’ve skived off to have a smoke, have a chat with their mates, etc.  On other occasions, they will be scrupulously honest and get you to sign their time sheets.  Check the arrangements first with your contractor.

Getting Work Done When You Are Not There.  I have found it extremely difficult to get work done successfully in our absence.  Generally, things happen when you are there and probably need to be since one often has to make decisions on the spot which aren’t apparent initially eg when there are several options to be considered – difficult to do via email really.  If you are planning to have work done, include time to stay up on the hard or on the dock (at least a week or two) before launching so that you can be there to supervise any work.

Good Contractors.  In BVI my top contractor/technician was a Canadian, also an active sailor at the Bitter End Yacht Club.  Even though his boss charged top dollar, he provided top quality work, talked to me about what he was doing, did more than I asked for and willingly passed on to me other information to help me learn about my engine, plus plus.  My BVI Yacht Sales broker and his fellow staff members were also very good and extremely helpful whenever I bothered them for advice, which was often and wide ranging.  In Trinidad, the expert riggers (local and expat) from Trinidad Rigging were very helpful and professional.  The canvas man, from The Upholstery Shop in Power Boat’s compound in Trinidad, was very cooperative and did excellent work.  In Guadeloupe, when I had to get the generator fuses fixed, an electrician (Waypoint) even went as far as to lend me his personal car so that my son and I could purchase a few bits and pieces on the other side of town. This was exciting for us – driving around a large city on the ‘wrong’ side of the road.  He also explained things as he worked on the generator.  The two marinas - Power Boats in Trinidad and Nanny Cay Marina in BVI - have been great and very helpful.  You just have to find the good people and avoid the not-so-good, a challenge but don’t be afraid to trust your instincts.

Deliveries & Orders.  I would have to advise against picking up bits & pieces along the way as you cruise unless you really have to – let me explain.  Initially, our main constraint was weather (it was the start of the hurricane season and we needed to keep moving on to Trinidad) and our order for a windvane self steering device came (from the UK) in 2 boxes, separately.  We picked up one box and fitted the contents in St Martin – duty free and waited for the next delivery, the all important auxiliary rudder.  We had to move on before the second box arrived so stopped in Antigua then in Guadeloupe; finally the rudder arrived and we could be on our way.  Not before paying duty and being hijacked by a local taxi driver – a most unpleasant experience, which fortunately, the marina staff helped me sort out.  In another instance in BVI we ordered some spare parts.  As they hadn’t arrived before the date we were due to leave, a fixed date we had originally passed onto the contractor, we let the business know we were leaving.  Some four months later, he was still demanding payment for an item we never received, even going so far as to importune the yacht broker staff for the money.  So, keep records of everything – what & when you order, especially who you speak to and what was said!  And remember those 3 P’s…..
And you find yourself in places like this trying to find someone to fix them.
(Jacksonville, Florida)