Showing posts with label marinas. Show all posts
Showing posts with label marinas. Show all posts

Sunday, February 28, 2016

2015: In the Marina & Loving It

Preveza Marina continued (Part 2):

Generator Coolant Water Pump.  The generator has a coolant system that you fill with antifreeze and this keeps the insides of the important bits of the engine cool.  Keeping the coolant cool is the job of the raw water that is circulated around the engine and spat out with the exhaust.  Well, this time it was the coolant water pump’s turn to fail.  Shortly after we set off on our trip north for Croatia there was clearly a major leak and gathering in the drip tray was all this coolant.  We returned to Preveza where our new best friend Stefan soon diagnosed the problem as being a failed coolant water pump ie it had corroded through its casing.  I thought that’s what the antifreeze coolant was supposed to stop.   Two weeks later, we had a new spare pump and fitted, at a modest cost that I still grit my teeth over – US parts imported into Europe means BIG money, mostly taxes.
This folks is what caused all the teeth gnashing, many weeks delay
and almost broke the annual cruising budget!!
Masthead Anchor Light.  This was working perfectly when we tested it shortly after we returned to the boat this year.  Once on anchor, however, we found it would not work, or would eventually.  After a trip up the mast to check the fitting and globe, when it seemed to work properly after some fiddling and testing, we then found that it would flash regularly rather than remain constant when turned on.  I still have no idea why it flashes but we just left it – it made it so very easy to identify our boat when returning to the anchorage at night time!  I might add, for all of you that are tut tutting, there are any number of combinations of anchor lights around Europe eg flashing single and multiple red and/or white lights at mastheads, in cockpits, tiny cheap solar lights that you can hardly see (especially when near a town with all their lights showing), and many boats without any anchor light at all.
There'll be a few more folks in town shopping today
Bike Repairs.  Our folding bikes are indispensable.  I’m surprised to see so many cruisers walking to/from/around town when they could be biking it.  Ours needed a service and a local Greek bike shop owner in Preveza did a wonderful job of restoring (read replacing) our fancy Shimano gears and generally fixing the bikes back to almost new.  We also lashed out and purchased some helmets.  The shop was a referral through Aktio.
Outboard Safety/Cut Off Switch.  Our Yamaha switch had given up the ghost some time ago although it would cut off when you pulled the clamp from the ignition.  Eventually it wouldn’t do that so I had to disconnect the switch, let it hang down and then use a coin or copper washer to make the electrical contact that would turn it off.  Tried to get a switch in Greece but not possible apparently.  Will get one in Oz and take it back overseas in 2016.
Ruins always seem conveniently located in Greece.
This is Nikopolis, Augustus's celebratory city just outside Preveza

Wednesday, February 24, 2016

2015: In the Marina & Keeping Busy

Preveza Marina: (Part 1)
A view over Preveza Marina.  Yes, another trip up the mast. 
To work out why the mast head light is still flashing...

Preveza in splendid summer colour
Making Life Easy.  In 2014, we'd discovered a neat trick.  Having spent too much time on the hard in boatyards over the years, we experimented with the options Preveza offered.  We'd found & booked space in the Preveza Marina a week prior to haul out.  Aside from its perfect location at the quiet end of the town, we could make most of our "leaving the boat" preparations with quite a few more conveniences.  Haul out was made with only a couple of days (not weeks or months!) on the hard before flying out.  This experience turned out so well, we gave it a shot again at the start of the season - only in reverse.  Splash after a few days then put-put over to the marina.  Perfect.
Generator Would Not Start.  I tried and tried but it started only after a lot of attempts.   I thought this was probably because the generator had been idle for eight months or may be the glow plugs weren’t quite right.  The next day when I tried, the engine would not turn over properly.  I cleaned all the terminals I could access and the engine started but then wouldn’t turn off when I pushed the cut off switch.  Finally, I managed to stop the engine by removing a ‘plug’ on the circuit board.  Time to call in the professionals! 

So, called on Stefan (yet again!) and, after an hour and a half of tracing circuits, looking at wiring diagrams, playing with switches, trying to start the engine without success, we found that the cut off wire goes via a water temperature sensor  on the engine block before it connects with the cut off terminal block.  This wire terminal at the temperature sensor had simply fallen off and so there was an interrupted circuit.  Once Stefan re-joined the wires all was as it should be and everything worked.  I have stated before that while cruising you meet some of the nicest people in the world that work on boats and Stefan is one of those.  He was so mortified that he didn’t find the fault quicker that he made his bill (we thought!) ridiculously cheap. He is also one of those people who is more than happy to explain exactly what he is doing and why, so I always learn heaps from these guys. 


Oh look!  Our new neighbour is another Hunter
Anti-Siphon Valve Broken.  Well, not quite.  I had retightened the hose clamp near the engine water inlet pump, several times, but it still leaked from there, or so I thought.  When we stopped in a marina we pulled the cover off the engine and, after starting the engine, it was soon plainly obvious that the water leak was coming from the siphon break, which sits a couple of feet above the raw water inlet hose.  One of the plastic fittings of the anti-siphon valve had sheared and it was slowly but constantly dripping water down on to the raw water inlet hose and then running along the bottom of the hose to the water pump.  Duh!  But what a coincidence – it never occurred to me that it could be anything but the newly fitted water hose.  Anyway, the broken siphon valve was easily replaced and all works without any water leak.  I might add that Stefan assisted with this discovery and repair too.