2016: Run for Cover...

The anchoring field was busy in June

The plan for this year was to cover Italy and Malta.  First stops were ports we missed on our 2015 “round the Adriatic tour”, then cross to Malta, head up to Sicily and finally meander up the Italian west coast taking time to hit all THE tourist spots.  Haul out decisions would be made on the fly; hoping for somewhere along the French or Spanish coast.  Big plans and bigger problem - namely our limiting 90 day visa!  We’ve moaned about this before on the WJ3 blog but the difference with the middle section of the Med is that there is nowhere “close” to run and hide.  

Greece:
2016 began with the usual boatyard chores in Aktio - two weeks of hard slog, but who can deny it's a pleasant life.  WJ3 was treated to a professional polishing, the shower sump was unblocked, the anchor line replaced, rusty bicycles serviced and bow thruster batteries sorted out (they had not charged in our absence).  We needed an electrician to sort the battery issue out.  Finally, WJ3’s rigging was inspected – an insurance requirement.

Aktio in Preveza - a great place to haul your boat

On splashing, the engine started…that was good, but the generator again chose to be obstinate.  Hmmm, something to look at whilst on anchor, we thought.  Launching Bruce (the dinghy) too was something of a concern as the outboard stubbornly refused to function and more alarmingly, began to fill with water.  Drat!  Someone had stolen our dinghy bung – and of course, it’s a US fitting in an EU world.  To add to post-launch miseries, the bow thruster continued to be obstinate, crying out for even more professional help.  So there we sat, afloat with not much working.  Sound familiar?

Within a day of splashing, we moved into the Preveza Marina and so our precious Visa Days ticked by whilst we attended to:

Generator Coolant Pump.  It was leaking and I wasn't sure how to remove it as it's part of the engine, not a separate item like the saltwater pump.  I had a local German mechanic look at it (we’d used him before) and, on inspection, he pronounced it dead.  It was badly corroded and needed to be replaced with a new one.  This was at the start of the season at Preveza, Greece, and so we had to wait three weeks for the replacement part to be quoted, ordered and then delivered – from the US of course.  It took about an hour to put the pump on.  The generator ran fine thereafter.  I won’t mention the cost except to say that it was enormous, even the mechanic was embarrassed to tell us.

Time for a last swim at Jumping Fish Bay

Outboard Motor Not Starting.  Again, right at the start of the season, the outboard wouldn’t start, even though all was working fine at the end of the season when I run it until the carburetor ran out of fuel.  In hindsight, I should have run it in the yard before launching, but didn’t; an oversight on my part.  Anyway, after trying for some time I pulled the carburetor apart and inspected it for cleanliness.  It looked clean, but after I put it back on, it still wouldn’t start.  A kindly fellow on a nearby boat came over in his dinghy and freely offered advice, but despite his remedies, it still would not start.  Time for some searching on the web!  One useful piece of advice was that “a clean looking carbie does not necessarily mean it IS clean”.  This YouTuber advised to clean it to be sure, especially by inserting a thin wire into every orifice possible.  Well, I did this and the outboard started just fine.  So, big lesson here is that just because a carbie looks clean doesn’t mean it is and so do what I eventually did.  I’ll freely admit I did not see anything suspicious as I prodded and probed with my fine piece of wire.
  
Refrigerator Re-gassing.  Ahhh, yet again we had to have the refrigerator motor/evaporator re-gassed with the unusual hard-to-locate gas required for our Grunert 110 volt fridge.  Our reliable mechanic, although licenced, was not available so we contacted a local guy recommended by the marina.  Short story is he tried to rip us off by quoting and then trying to raise the price on the day.  Also, he tried to convince us to do more modifications than necessary.  Anyway, the fridge worked once it was re-gassed.  This little episode, apart from expensive now annual re-gassings, prompted much discussion on “a better way” to refrigerate given that our little WAECO battler was working brilliantly and running diligently on 12 volt sunshine power.

AIS.  We had purchased a GME AIST 120 and I fitted it next to the chart table, connected to our laptop via the program CD that came with it, and yet another antenna was fitted to the pushpit.  It works okey but we have since passed a number of ships at quite close range and there has been no signal received from them at all.  I certainly would not rely on it. 

There's more to follow....

Sad to be leaving our favourite Taverna over near Aktio